To build a world-class laboratory, Hande Axle, the China-Axle axle test center has been recognized by the state

From January 5th to 6th, 2019, the China National Accreditation Service for Conformity Assessment (CNAS) expert team conducted an on-site review of the Hande Axle Test Center, after reviewing documents, on-site inspections, and on-site tests. On March 20, 2019, the test center officially obtained the laboratory accreditation certificate issued by the China National Accreditation Service for Conformity Assessment (CNAS). This is the first time that the company's laboratory has passed the audit after CNAS's revision.

China National Accreditation Service for Conformity Assessment China National Accreditation Service for Conformity Assessment

The China National Accreditation Service for Conformity Assessment (CNAS) is a national accreditation body approved and established by the National Certification and Accreditation Administration under the Regulations of the People's Republic of China on Certification and Accreditation. It is responsible for the certification bodies, laboratories and inspection bodies. And other relevant agencies' accreditation work. China's national accreditation system for conformity assessment has been integrated into the international recognition and mutual recognition system, and has an important position in the international recognition and mutual recognition system. The accreditation of the test center is not only a high recognition of the company in terms of test verification, but also enhances the company's Market competitiveness has won the trust of all walks of life.

As the research and development test base of the company's products, the test center undertakes the development and verification of various truck bridges, passenger bridges, engineering machinery axles, electric axles and parts. As the leading laboratory and the company's leading position in R&D and innovation, the test center always demands itself with high standards, high standards and high specifications, and is committed to building a world-class laboratory. In 2019, the laboratory will gradually introduce 5 sets of advanced testing equipment at home and abroad, with an accumulated investment of more than 200 million yuan to further enhance the hardware strength of the test center. All the staff of the test center will follow the quality policy of “scientific, fair, accurate and timely continuous improvement” of the test center, and work hard to make progress towards the goal of the world-class laboratory, and provide important support for the company to realize the “2035 development strategy”.

Reading volume: Source: Chinese network of truck: cold autumn

Vacuum sweeper truck (also called air vacuum truck, street cleaing truck, road sweeping vehicle, truck mounted sweeper, road cleaning truck, street sweeping truck, Street Cleaning Truckis used for all cleaning, brushing and vacuum collecting of surface dusts, leaves, mud, soil, sand, stone chips, gravels and other small particles on the ground of city/ municipal roads and areas.

Vacuum sweeper truck is a new style of Road Sweeper Truck. It could be used to cleaning not only dry dust but also wet trash. And it doesn`t have raising dust problem because of the brush shield and vacuum pipe. 
There are two stainless steel dustbins for collecting dry and wet trash. And their functions are independent. Wet trash will never be collected into the dry dustbin. 
The special dry  and  wet cleaing swith modle makes  it widely used in dry and dusty places for road cleaning. Such as mining factory, lime / cement company, steel factory, etc.

Road Sweeper Truck

Road Sweeper Truck,Street Sweeper Truck,ISUZU Road Sweeper Truck,Road Cleaning Vehicle


This entry was posted in on