Â
Battery charging and discharging testing Product Description
1. The battery tester is according to the international standard design, battery tester each channel has an independent constant-current source and constant-voltage source. It is used to test rechargeableas( Ni-MH battery, Ni-CD battery, Lithium-ion battery and polymer batter, etc.) pack battery, and so on.
2. Battery tester's internal electrical power supply uses the high efficiency switching power supply, the energy conservation effect isemarkable, each power tube has the independent protection circuit, guarantees the Equipment works with safety and reliability.
3. Measure adopts four wire method, decrease contact error, increase measure precision.
4. Battery tester e ach channel is independent; With high efficient cooling system, Equipment can work 24 hours with full load.
Â
We also provide the different USES of various types of testers.
| Input power | AC 220 V ±10% / 50 Hz | |
| AD,DAResolution | AD:16bit DA:14bit | |
| Input Resistance | ≥1MΩ | |
| Voltage | Per Channel Voltage Range | Charge0V-5V;Discharge2.5V-5V |
| Stability | ±(0.05% of reading + 0.1% of range) | |
| Resolution | 1/16384*range(5V) | |
| Stability | ≤0.1% | |
| Current | Per Channel Current Range | Charge0A-20A;Discharge0A-20A |
| Accuracy | ±(0.05% of reading + 0.1% of range) | |
| Resolution | 1/16384*range(20A) | |
| Stability | ≤0.1% | |
| Power | Per Channel Output Power | 800W |
| Stability | ≤0.1% | |
| Time | Current Response Time | ≤50ms |
| StepTime Range | >1000h/step | |
| Stability | ≤0.1% | |
| Data Recording | Record Condition | Δt:(1~60000S)ΔV:(5mV~5V) ΔI:(20mA~20A) |
| Record Frequency | 1Hz | |
| Charge | Charge Mode | Â Â Constant Current Charge,Constant Voltage Charge, Constant Current and Constant Voltage Charge |
| End Conditon | Voltage,Current,Relative Time,Capacity | |
| Discharge | Discharge Mode | Constant Current Discharge |
| End Condition | Current,Current,Relative Time,Capacity, | |
| Cycle | LoopMeasure Range | 1-9999times |
| Per Loop Step No. | 64 | |
| Nested Loop | Nested loop Function,Max Support 3 Layers | |
| Protection | Software Protection | Power-down Data Protection , Off-line Testing Function , Setting Protection Condition,Setting Parameter:Voltage Low limit,Voltage Upper limit,Current Low limit,Current Upper limit,Delay Time |
| Hardware Protection | Addition Avoiding Reverseconnection Protection Model | |
| Voltage and Current Testing Sample | 4-wire connecting | |
| Noise | <65DB | |
| Database | My SQL Databace | |
| A Means of Communication of Upper Machine | TCP/IP | |
| Data Output | EXCEL,TXT,Graph | |
| Communication Interface | EthernetPort | |
| Per Unit Main Channels No. | 8 | |
Product photo
Company Information
Â
We are the first and earliest exporter for Li-ion battery materials. We focus on lithium electricity industry for 10 years, can provide full set of lithium battery materials ,equipment and technology.  We can provide one-stop solution for you, provide a "turn key" project for you!
FAQ
Welcome to inquiry! Â
For more information, please contact me directly.Â
 W: 0086 150 539 60895
Thank you for your time!
Â
MSD Slurry Pump(Multistage Pump)
· Model: MSD
· Head: 15-355m
· Capacity: 10-350 m3/h
· Pump type: Horizontal
· Media: Slurry
· Material: Cast iron,SS304,SS316L,Duplex SS
Multi stage slurry pump
Capacity: 10-350 m3/h
Head:15-355 m
Motor Power:3-450KW
Multistage Slurry Pump,Multistage Centrifugal Slurry Pump,Small Multistage Slurry Pump
Damei Kingmech Pump Co., Ltd. , http://www.kingmechpump.com