Mitsubishi Heavy Industries has successfully developed an option for the cutting gear hobbing machine "GE15A", which is equipped with a cutting device inside the fuselage and was launched on August 8, 2007. After the hob is machined, it is necessary to remove the burrs generated during the machining, and then cut the corners of the gear end faces one by one. Previously, the use of a separate cutting machine has been used to increase the installation area. The new cutting device solves this problem by using the cutting process as part of the hobbing machine.
The hobbing process and the cutting process can be synchronized to maintain and increase productivity. In addition, the chips generated during the cutting process can be uniformly processed by the chip discharge conveyor (Conveyor) inside the hobbing machine, and no chip processing is required.
The hobbing process and the cutting process can be synchronized to maintain and increase productivity. In addition, the chips generated during the cutting process can be uniformly processed by the chip discharge conveyor (Conveyor) inside the hobbing machine, and no chip processing is required.
Changhong Machinery Manufacture Co., Ltd. , http://www.dzpumpfluid.com