Wheeling fire at 165 Hintz Rd 10-12-12

The Wheeling Fire Department responded to a shed fire on Friday evening along Hintz Road near the railroad tracks. Units from Station 23 were dispatched after receiving a report of a "header," which led them to an asphalt contractor’s yard east of the MABAS Readiness Center, close to the railroad. The scene quickly became complex, with flames spreading to wood pallets and threatening a nearby truck containing a tank filled with tar. Engine 23 arrived first and found the fire in the yard adjacent to the shed, which had already spread to the pallets and was getting dangerously close to the tar-filled truck. They called for Squad 24, equipped with a pump-and-roll system, to assist with a rapid attack. Meanwhile, Engine 24 laid several hundred feet of LDH (large diameter hose) from the yard to a hydrant on the neighboring property to establish a continuous water supply. Larry Shapiro, a local photographer, was on the scene and captured several key moments. One image showed Engine 23 supplying water to firefighters while they waited for the main line to be charged. Another highlighted Squad 24 using a remote-controlled bumper turret to keep the fire at bay and protect the tar tank. Additional photos depicted the challenging environment, with the fire located in a densely packed area surrounded by hazardous materials. As the operation continued, crews worked to control the flames and keep the tar tank cool until the water supply was fully established. A long hose lay was visible as Engine 24 connected to the hydrant just outside the MABAS Readiness Center, which once housed the Wheeling Public Works Department. The fire was eventually brought under control, thanks to the coordinated efforts of multiple units. For more images from the incident, you can view the full gallery here.

Heat Pump For Greenhouse Heating

Introduction to GENT heat pump for greenhouse heating

The heat pump heating unit is a single-heat air source heat pump that uses air as the heating source and absorbs heat from the air to prepare hot water, thereby achieving indoor space heating. Therefore, this unit can meet the needs of indoor space heating. There are many new greenhouses in the agricultural field that need to accurately control the temperature in the greenhouse and have the need for heating in the greenhouse, so agricultural users can consider using this unit.

Working principle and system composition

The core components of the Air Source Heat Pump Heating system are the compressor, evaporator, condenser and expansion valve.

The air heat source heating unit absorbs low-temperature heat energy from the air, releases it into the greenhouse after being compressed and heated, thereby transferring the heat from the outdoor air to the room, raising the indoor temperature, and achieving indoor space heating.

Core advantages

1. High efficiency and energy saving

Compared with traditional electric heating or coal-fired heating, the energy-saving efficiency of air source heat pump greenhouse heating can reach more than 50%, and the energy utilization efficiency is high.

2. Low-carbon and environmentally friendly

The air source heat pump heating system does not rely on fossil fuels, and there is no exhaust gas or smoke emission during the operation of the unit, which can effectively reduce greenhouse gas and pollutant emissions and meet the development needs of green agriculture.

Therefore, users who have corresponding needs, that is, the need for heating in the greenhouse, can consider this unit. This commercial air source heat pump can effectively control the heating cost and operating cost while meeting your heating needs in the greenhouse.

heat pump heating system,heat pump heating,air heat source heating,commercial air source heat pump,air source heat pump greenhouse

GUANGZHOU GENT NEW ENERGY TECHNOLOGY CO., LTD , https://www.gentgz.com