Tianlong Tanker

Tianlong tank truck: also known as Tianlong mobile refueling vehicle, computer tax-controlled refueling vehicle, tanker, Dongfeng refueling vehicle, Dongfeng oil tanker, puller, oil transporter, edible oil transporter, mainly used as oil Derivatives (gasoline, diesel, crude oil, lubricating oil, coal tar, etc.) Transportation and storage. According to different use and use environment, there are many kinds of refueling or transporting oil functions, which have the functions of oil absorption, pump oil, multiple oil loading and distribution. The special part of the oil tanker consists of tanks, power take-off devices, transmission shafts, gear oil pumps, and pipe network systems. The pipe network system consists of oil pumps, three-way four-position ball valves, two-way ball valves, strainers and pipes.

Tianlong tank truck is a special type of special automobile modified from the original Tianlong chassis. It is mainly used for the transportation and storage of petroleum derivatives (gasoline, diesel, crude oil, lubricating oil, and coal tar, etc.) and can also be used. To transport edible oils, etc., depending on the items being shipped, the material of the tank is mainly improved. Tanker trucks are mainly used for the transport of various oil and chemical liquids in the petrochemical industry. They have the functions of oil absorption, pump oil, multiple oil loading and distribution. Separate positions can be divided into different oil products, chemicals, foods. Designed to achieve pumping, pumping out of the table, the pump into the pump but the table, self-flow over the table, but the table and other functions. Optional fuel pump, flow meter (back to zero), single counting, double counting, tax-controlled fuel dispensers, refueling reels can be separated from the warehouse, can be divided into different oil products, chemicals, food. Designed to achieve pumping, pumping out of the table, the pump into the pump but the table, self-flow over the table, but the table and other functions.

Separate positions can be separated, and different oils can be dispensed, and pumps can be pumped out of the table. The tank material is made of high-quality carbon steel plates produced by Wuhan Iron and Steel Company. Cans are round, oval, and round. The tank body adopts advanced butt welding technology. After the tank body is formed, the shot blasting pretreatment process is adopted. The high-pressure gas leak test is used. The tank body has high strength, stable center of gravity and beautiful appearance and durability. Oil pumps use self-priming pumps and gear pumps. The oil gauge uses a zero return flow meter or a vehicle-mounted tax-controlled computer fueling machine.

1. Tanker trucks should be equipped with special fire extinguishers and should be equipped with tow subway chains and electric poles. When driving, the tow subway chain should be in contact with the ground; when refueling or draining, it must be inserted into the damp ground. 2. The Oil Tank filling hole should be tightly sealed, the oil discharge valve and the oil discharge pipe should be free of leakage, the tank vent hole should be unimpeded, the oil pump oil inlet filter should be cleaned frequently, and the two ends of the joint cover should be installed immediately after the delivery oil hose is used up. No dirt can enter. 3. Gasifiers and exhaust pipes of internal combustion engines must not be tempered. The exhaust pipe should be installed in front of the vehicle. 4. Tanker workers must not wear nailed shoes. It is forbidden to smoke near the oil tank and fire is strictly prohibited. 5. When parking, you should stay away from the fire source. During the hot season, you should choose a cool place to park. During a thunderstorm, it must not be parked under trees or under high-voltage lines. When parking in the middle of driving, there should be special care. 6. During the inspection and repair process, if the operator needs to enter the oil tank, it is strictly prohibited to carry the fire, and must have reliable safety protection measures. The outside of the tank must have special personnel to monitor. 7. All electrical devices in the vehicle must be well insulated and no sparks are allowed. Vehicle work lighting should be a safety light of 36V or less. 8. When the tank sedimentation tank is frozen, it is forbidden to use fire to bake, and it may be used to melt hot water, steam, or thaw the car into the greenhouse. 9. When carrying out maintenance and inspections under the vehicle, the internal combustion engine should be turned off, the hand brake should be tightened, and the wheels should be secured. 10. When a vehicle needs repair after repair, it should be driven by a qualified person. The vehicle must not be loaded with people and carry loads. When a vehicle needs to be tested on the road, a test license issued by the traffic management department should be affixed. 11. When parking on a ramp, a reverse gear should be hung on a downhill parking, a gear should be hung on an uphill parking, and a triangle wooden wedge should be used to fasten the tire.

(1) Do not pour petrol into the carburetor port while the engine is running or when it is cranking. The carburetor is filled with gasoline to increase the concentration of the air-fuel mixture in the cylinder. Although this will be beneficial if the oil fails to enter the cylinder, it is of no avail to the other causes of the failure, and this may also cause Fire, burns and burned vehicles and other hazards.

(2) Gasoline filter cartridges are not advocated when maintaining gasoline filters. Many people like to use gas-fired ceramic filters to remove impurities from filter elements when they are maintaining gasoline filters. The hazard of doing so is easy to misfire, at the same time have an impact on the life of the filter element.

(3) In the oil depot, it is not allowed to check the storage condition of the battery by means of short circuiting. Because in poorly ventilated small oil depots, equipment such as tires, batteries, and tarpaulins are often placed on the ground. Spilled gasoline is on the ground. Sparks generated during fire fighting are likely to ignite the oil molecules in the air.

(4) The drag chain of the tanker truck must not be wrapped around the girder. Oil, like other substances, also generates static electricity when rubbed against another object. This kind of electrostatic flashover may ignite the fuel and cause a fire. Therefore, a grounded ground wire should be installed on the oil depot, and a grounded iron chain should be installed on the tanker to prevent static sparks in the tank. This chain cannot be wound on the frame of the beam and must be placed on the frame. On the ground, and drag the lot no less than 50 centimeters.

(5) It is forbidden to add fuel to the tanker under the high voltage wires.

(6) The method of hanging fire is not often used. Sometimes the spark plug of a car will have carbon deposition. When a certain cylinder's carbon deposition is serious, the cylinder will not work properly. In order to make the cylinder work normally, the method of “hanging fire” outside the cylinder is adopted (leaving the spark plug and the high voltage wire 3 Mm - 4 mm gap) to improve the energy of the spark plug electrode flashover, so that the cylinder back to work, but the general "hanging fire" method is not easy to fall off with little attention. If there is dripping gasoline on the cylinder, it is extremely easy to have a fire. Therefore it is only a temporary remedy. The correct treatment should be timely cleaning and maintenance of spark plugs, try to avoid the use of "hanging fire" method.

(7) No leakage is allowed in the automotive oil system. If the chassis part of the oil circuit is leaking, and it is on the ignition late, mixed gas lean point, due to slow combustion will lead to exhaust pipe fire, the body temperature increased, more than ten times the ignition point of gasoline vapor (gasoline vapor The ignition point is 28°C). Leaking out the oil can easily cause a fire and cause the vehicle to be scrapped. If the carburetor part drips on the cylinder head, spark plug high voltage spark leakage may also cause fire.

Preparation of tanker before use

1. Insert the conductive rod into the ground to make it "grounded". If the ground is dry, it can be watered to make it wet, ensuring good grounding. Check the ground chain to make contact with the ground.

2. Open the tanker control box door and check the valve handles to make them closed (vertical position).

3. When using the oil pump for the first time, there is no oil in the pump and it is necessary to add oil in advance. 10 liters of oil can be added through the oil inlet.

4. Check the lubricant oil level in the gearbox to the lower edge of the grease plug hole. If insufficient, add gear oil.

5, check the gearbox lever, so that it is in a neutral position, check the position of the power lever control handle, so that it is horizontal to the right position, check the throttle controller to make it the smallest.

There are many factors involved in avoiding fatigue driving for tanker drivers, such as power steering, shock-absorbing steering wheel, clear gear, keeping a good mood, adequate sleep, light diet, good health, moderate seat height, and whether the seat is in front or behind. Appropriate, body and tanker steering wheel distance, whether the seat can be tilted back slightly.

The contents of the examples are too many. Here I will talk about some of the major aspects.

1, tank car driver friends have to do psychological and physical adjustment before driving.

Tank car drivers must maintain a good mood, do not let all kinds of trivial things affect the mood, distracted. As a tanker driver, he must ensure adequate sleep, 7 hours of sleep a day, and maintain a regular lifestyle.

2. The steering device must be flexible.

The steering wheel of a tanker with assisted steering will appear particularly light. Without the assistance system, the steering wheel of the tanker will be stiff and stiff, and no difference will be felt when driving in a straight line. However, once the direction is turned, the difference is obvious. Especially obvious. Tanker steering wheel is the main way for the driver to perceive the road conditions, which makes the steering wheel more obvious than other parts of the steering wheel. For some hard textures, steering wheel sets can be selected to reduce the driver's hands and body fatigue.

With these excellent equipment, you can greatly ease the driving intensity of the tanker driver's friends.

3, the cab seat must be adjusted

The seat is too high, and the driver tends to hunch when driving the tank truck. Even if he maintains a straight posture, it will appear stiff and inconvenient to operate. When the forefoot is stepped on the clutch pedal of the tanker and is fully stamped to death, the entire leg still needs to maintain a certain degree of bending so that the accident can have a buffer space and reduce leg fatigue.