This year, large-scale joint ventures in China, including Volkswagen, Hyundai, BMW, Toyota, and Nissan, have accelerated the market for new energy vehicles, and a race between multinational car companies and local brands in the new energy vehicle market is starting.
Recently, in the statistics of new energy vehicles released by Chinese multinational car brands for the Chinese market, most of the joint venture brands have targeted the two markets of pure electric SUVs and plug-in hybrid cars, and the size of the models introduced has become more apparent. High-end trend.
Some analysts pointed out that the new energy vehicles introduced by the joint venture brands show a clear trend of high-end, with the main models being mid-size cars and SUV models. This is in line with the fact that the domestic market for minivans in the pure electric vehicle market is the main force for sales, and the self-owned brands have less power in the middle- and high-end markets.
Specifically, compared with independent brands, the new energy vehicles brought by joint venture brands are more advanced in technologies such as motors and electric control. For example, motor power is generally higher, and more models use more complex motors. In addition, the joint venture brand also has advantages in the traditional chassis, safety technology and interior crafts.
It seems that the joint venture brand will make a big move to the new energy auto market, which will certainly cause a certain impact on the Chinese market, and the competitive landscape of China's new energy auto market is about to change.
Below, take a look at the current representative of the joint venture new energy models on the market:
Kia K5 PHEV
The appearance of the Kia K5 PHEV is consistent with that of the new Kia K5 gasoline version, but the details have been adjusted. It is equipped with a hybrid system consisting of a 2.0-liter GDI four-cylinder engine and a motor. The cruising range is 43 km in pure electric mode. The total cruising range under the oil and electricity model will exceed 900km.
It is understood that the gasoline version of the Kia K5 is a 16.48 million from the sale of mid-size sedan, the cost has been relatively high. The plug-in hybrid version of the K5 has greatly improved the fuel economy of the new car and is expected to further increase the market competitiveness of the Kia K5.
Dongfeng Nissan Sylphy EV
Dongfeng Nissan Sylphy EV uses the power technology of the second generation of listening winds. It is equipped with an electric motor with a maximum power of 80kW (109Ps). The cruising range of integrated operating conditions is 338km. In fast charging mode, it can be charged to 80% in 40 minutes.
More importantly, the model is equipped with Nissan E-Platform platform, professional and efficient three-electric system, smart security and smart Internet technology, and four kinds of products that are compatible with the space for hospitality. It can achieve energy recovery efficiency of up to 22%. , Integrated power consumption in one hundred kilometers is 13.8 kWh.
No doubt, Dongfeng Nissan Sylphy EV is a professional grade pure electric vehicle. At present, the model has appeared in the Beijing auto show and is expected to be officially listed in the second half of the year. Once it is listed, it will surely cause a certain impact on the Chinese market.
New Mondeo PHEV
Mondeo PHEV is the first in China and is the only PHEV plug-in hybrid mid-level sedan that is currently launched on the market by a joint venture brand. The car is powered by a 2.0L Atkinson cycle engine + 92KW motor. The fuel consumption per 100 kilometers is 2L, and the pure electric range is 52KM.
Compared with other hybrid cars, the new Mondeo PHEV adopts an ECVT assembly that combines the functions of a motor/generator/electric energy recovery/speed matching and has functions such as energy recovery and power conversion.
At present, this model has officially entered the ninth batch of recommended catalogs in 2017 and can enjoy preferential subsidies for car purchase.
Beijing Benz E300eL
The Mercedes-Benz E300eL is equipped with a plug-in hybrid system consisting of a 2.0T engine + electric motor. The integrated maximum power is 286 hp and the peak torque is 549 lb.m. The pure electric cruising range is 32 kilometers.
After the new car is put on the market, it will compete with large-scale vehicles such as Audi A6L 40 e-tron, BMW 530Le, Cadillac CT6 PLUG-IN and other new energy vehicles.
Yue World PHEV
The appearance of the PHEV new car of GAC PHK is basically the same as that of Chuanqi GS4 PHEV. The only difference is that the new car adopts a new-style single-beam inlet grille. The length and height of the new car are 4500*1852*1708MM, and the wheelbase is 2640MM. .
In terms of power, the vehicle is equipped with a hybrid system consisting of a 1.5-liter Atkinson cycle engine and a G-MC electromechanical coupling system. The combined fuel consumption per 100 kilometers is 1.8 liters.
Market competition: BYD (002594) Song DM and so on. Compared to BYD Song DM, the width of PHEV is more dominant.
Cheetah CS9 EV
Cheetah CS9 EV was officially released during the 2017 Shanghai Auto Show. Its length, width and height are 4315*1840*1650MM, and the wheelbase is 2600MM. It is equipped with a motor with a maximum output power of 90kW and a battery capacity of 48.18KWh.
It is understood that the maximum speed of the vehicle can reach 130km/h, the mileage of the integrated operating conditions can reach 255km, and the maximum cruising range at constant speed can reach 310km.
Competitive products in the market: Beiqi EX Series, Changan CS15EV, Jianghuai IEV7S, etc.
SI E20X
On April 24, JAC Volkswagen announced its first pure electric SUV. The first model is the SiChuan E20X, which is expected to be launched in the third quarter of this year.
It is understood that the new car will be used for the first time in the development of artificial intelligence products jointly developed by Volkswagen and outbound questions, including exterior mirrors with 360-degree panoramic imagery, smart charging, smart parking, and payment functions.
In terms of power, the new vehicle is equipped with a ternary lithium battery provided by the JAC Huasheng battery system, and its cruising range reaches 302 kilometers. In addition, the vehicle is also equipped with a motor from Daoichi Power, with a maximum power of 85KW and a peak torque of 270 Nm.
BMW X1
The BMW X1 is equipped with a 1.5T engine + permanent magnet synchronous motor. There are three modes: Auto e-Drive (Automatic Output Mode), Max e-Drive (Pure Electric Mode), and Save Battery (Safety Mode), but the vehicle will take priority when it starts. Use electrical energy.
Market Performance: In the first quarter of this year, the BMW X1 sold 885 vehicles in China, ranking among the top 20 in terms of sales of new energy bicycles in China.
technical parameters
model
Feeding material size(mm)
Impeller speed(r/min)
power(KW)
capacity(t/h)
boundary dimension(mm)
PL(ST)-550
30
2258-2600
30-45
24-60(-5mm,30-60%)
2550*1650*2380
PL(ST)-700
35
1775-2050
55-90
55-95(-5mm,30-60%)
3312*1840*2800
PL(ST)-850
50
1460-1720
110-200
100-220(-5mm,20-60%)
3630*2200*2860
PL(ST)-850
50
1460-1720
150-220
113-240(-5mm,20-60%)
4700*2200*2850
PL(ST)-1000
60
1240-1460
220-320
180-345(-5mm,20-60%)
5060*2290*3700
PL(ST)-1000
60
950-1220
320-500
315-580(-5mm,20-60%)
5570*2660*3750
Company Introduction
product brief introduction
Widely used in water conservancy, hydropower, refractory, construction, high grade road, railway and other industries of artificial sand production operations.Especially for granite, basalt, gray-green rock, sandstone and other medium hard, especially hard, corrosive materials, than other types of products have more advantages.In the aspect of artificial sand production, its crushing capacity is far beyond that of other similar products, and is the most ideal artificial sand production equipment at present.
PL Vertical Impact Crusher is a perfect combination of unique rotor structure design, wear-resistant material technology, crushing speed optimization and hydraulic design. It's a classic example of the perfect blend of professional, technical and mechanical, and it's the full embodiment of new technology and new craftsmanship.This machine can realize the ingenious transformation of "PL" and "PLST". "Stone stone" is used for hard material processing, the sand production rate is about 40%. The "stone iron" type is used for the processing of medium and hard materials, and the sand production rate is 40%~60%.
performance
1. Unique design of rotor and cavity, large capacity of treatment, high sand forming rate, cube shape and high packing density.
2. Multi-usage, flexible application - unique feed crushing structure, and has many kinds of crushing cavity type, can be very convenient to realize "stone hit stone" and "stone while the iron is hot" transformation, so as to solve the problems of multi-usage.
3. Special drive mechanism makes the equipment run at high speed and smoothly.
4. The unique structure and materials of wear-resistant parts extend the service life and reduce the running cost.
5. Automatic hydraulic opening, lubrication, vibration prevention, temperature control and timing sensing device to ensure safe operation and easy operation.
6. Clever internal air circulation reduces dust dispersion.
7. It has the function of fine crushing and rough grinding.
8. High reliability and strict safety guarantee device to ensure equipment and personal safety.
9. Stable operation, low working noise, high efficiency, energy saving and high crushing efficiency.
10. The wearing parts have low energy consumption, and the wearing parts are made of the best wear-resistant materials in domestic and overseas, with a long service life.
11. The material self-lining in the impeller and vortex crushing chamber greatly reduces the cost of wear parts and the maintenance work. In the process of production, the stone can form a protective bottom, the fuselage is not worn, durable.
Inner constuction
"PL" : the material falls vertically and uniformly from the upper part of the equipment. Some of them enter the rotating impeller cavity at high speed through the feeder and the feeding tube. Under the action of high speed centrifugal force, they are ejected from the launching port of the impeller. and they are crushing in high speed with umbrella-type materials that falling in the circumference of the impeller by feeder shunt.
"PLST" : the material falls vertically and uniformly from the upper part of the equipment. Some of them enter the rotating impeller cavity at high speed through the feeding tube. Under the action of high speed centrifugal force,they are crushing in high speed with an adjustable metal counterpunch plate or counterstrike bar facing the impeller directly in the vortex chamber
Luoyang Hong Xin Heavy Co., LTD. is located in Luoyang Xin'an Industrial Park, Luoyang Hongxin Heavy Machinery Co., Ltd is an enterprise featured with industrial designing, processing and manufacturing, which is qualified for import-export trade. Covering an area of 15,000 square meters and holding an annual production value of 80 million RMB, the company of 20 million RMB registered capital has total 100 staff members, among which there are 20 engineering technicians owning senior and medium professional titles and 40 intermediate and senior technicians capable of product designing and developing.
Hongxin is dedicated to produce reducers, hoists, crushers, Ball Grinding Mills and the equipments of screening, coal washing, metallurgy and cement, and replacement parts. Meanwhile, we provide the perform maintenance service for various series of equipments. There are 52 large-scale equipments applied into the manufacturing process, such as T200 CNC floor boring and milling machine, YK 73125 CNC molding gear grinding machine, YK322B CNC molding gear grinding machine, Y3200 gear hobbing machine, Y1600 CNC gear sharper, 4m vertical lathe, 6.3m CNC vertical lathe, T110 CNC boring machine, and 52 middle-sized productive and assistive equipments, which integrate strong manufacturing and processing capability with complete managing system of production and technology, quality management system and comprehensive testing measures.
Certificates
Contacts
Vertical Impact Crusher
Vertical Impact Crusher,Vertical Shaft Impact Crusher,Vertical Shaft Impact Crusher,Impact Hammer Crusher
Luoyang Hongxin Heavy Machinery CO., TLD. , https://www.hxreducer.com