Most buyers are not familiar with the issue sweeping cars are most concerned about, sweeping vehicles a day about how much sweeping the area. The following is a work experience and related data provided by a sanitation worker.
According to the introduction of workers from the Harbin Municipal Sanitation Department, they would have to take a broom and go to the streets. A few hundred meters long that one person was responsible for would take about three hours to sweep away, sweeping away all the dust, and changing masks two or three times. . It is now much better than before. Streets basically use mechanical sweepers , street flushes, and sweeps. These processes can be completed in more than 10 minutes by a suction sweeper. She is only responsible for sweeping machines.
The working time of sweeping vehicles is usually 3 to 7 o'clock, 12 o'clock to 20 o'clock and 20 to 22 o'clock everyday. The sweeping of the corners that can't be swept by sweeping vehicles is done manually. 3 times efficiency. Wang Yong, deputy director of the Harbin Municipal Environmental Hygiene Office, told us that each sanitation worker's cleaning area is between 4,000 and 5,000 square meters, and a new type of sweeping vehicle can clean tens or even tens of thousands of square meters per day, improving the efficiency of work. It also improves security.
Hydraulic machinery is equipment and tools that can work through hydraulic oil. Common hydraulic machinery includes Baler Machine; hydraulic punch; hydraulic bender; hydraulic cutting machine; hydraulic pipe bending machines; hydraulic pump stations.
In this type of machine, the hydraulic oil is delivered to the actuator in the device by the hydraulic pump at a very high pressure. The hydraulic pump is driven by an engine or an electric motor. Hydraulic oil is controlled by manipulating various hydraulic control valves to obtain the desired pressure or flow. The hydraulic components are connected by hydraulic pipes.
Advantage
1. Reduce quality and save material. Reduce the number of parts and molds, reduce mold costs.
2. 2. It can reduce the amount of welding for subsequent machining and assembly.
3. Improve strength and stiffness, especially fatigue strength.
4. Reduce production costs.
Buy hydraulic machinery
1, speed, that is, class production, production efficiency, whether it is required.
2, weight, mechanical weight reflects the adequacy of the use of materials, part of the reaction of the product is durable, of course, is not the heavier the better.
3, power consumption, energy consumption should be small, the oil temperature should be low.
4, long service life.
5, the machine failure rate should be low. It is said that Shandong Hengwang Group CO.,LTD's hydraulic machinery reputation is very good
6, the safety performance of the machine is higher
Hydraulic Machine,Busbar Punching Machine,Busbar Bending Machine,Busbar Cutting Machine
SHANDONG HENGWANG GROUP , http://www.hwmac.com