Lab Chamber Programmable Constant Temperature and Humidity Test Equipment

Programmable High And Low Temperature Alternating Environmental Test Equipment


This test equipment simulates a full range of temperature and humidity conditions to evaluate the reliability, durability, climatic resistance, freezing resistance, quality assurance, and thermal endurance of products.

Features:
1. The chamber's exterior is made of stainless steel with environmentally friendly baking paint that resists corrosion and provides impact resistance. The interior is made of SUS304# stainless steel, which offers excellent heat resistance and is easy to clean.
2. A large LCD color touch screen controller helps save time during programming and setup, with temperature limits and alarms to protect your product.
3. A safety relay connection protects your device under test by cutting off power when the chamber is not running.
4. RS-232 communication allows for computer connection, enabling programming via software, monitoring the testing process, and automatically executing power on/off functions.
5. A fog-free viewing window and interior lighting provide clear visibility of the workspace and optimal observation conditions during testing.
6. Adjustable product shelves slide out for easier access, with a non-tipping design that supports heavy loads.
7. A 50mm diameter cable port is located on the left side of the chamber for power-on testing.
8. An optional electronic humidity sensor ensures accuracy and minimal maintenance across all test chambers.

Conform Standards:
IEC68-2-1 (GB-2423.1-2008) Testing A: Low temperature testing method
IEC68-2-2 (GB-2423.2-2008) Testing B: High temperature testing method
MIL-STD-202F (GJB360.8-87) High temperature life testing
MIL-STD-810D (GBJ150.3) High temperature method
MIL-STD810D (GBJ150.4) Low temperature method
IEC68-2-3 (GB2423.3-93) Testing Ca: Constant moist heat testing method.
IEC68-2-30 (GB2423.4-93) Testing Db: Alternate moist heat testing method.
MIL-STD-810D (GJB150.9-93) Moist heat testing method

Optional Accessories:
Cable Port: Available in size Ф100mm
Water purifier RO 80: Provides continuous purified water for the humidifying heater and wet-bulb
Dehumidifier: The rotation regenerating dehumidifier M-120 ensures precise control of low humidity (10C, 15%RH) for electrostatic reliability tests.
Defrosting Device: Automatically detects and melts frost on the evaporator when operating below 0ºC to allow continuous operation
Electronic humidity sensor: Precision Humidity Sensor with stainless steel protection tube




Chamber Dimensions:

Note:
1, The performance values are no specimen inside the test area.
2, At 20ºC ambient temperature, relative humidity 65%rh, rated voltage
3, According to IEC60068-3-5:2001 and IEC60068-3-6:2001
4, The above specifications are for reference only.

if you have any other request, please feel free to contact us. It can be made based on your request; thanks!!!