In the two types of CNC cutting machine cutting applications, the use of electric energy CNC plasma cutting machine and the use of gas cutting CNC flame cutting machine, whether in the cutting principle or operating methods are different, although the current domestic CNC cutting machine design The class cutting method has been better integrated in the use of the entire machine, but there are differences in the actual operation. Many CNC cutting machines purchased by many users of Wuhan Firepower Intelligence put two types of cutting methods together to cope with different cutting needs. However, in terms of operation, they still need to be treated differently. Do not confuse operations to cause unnecessary Equipment failure.
Here, we have organized the following simple operations of cutting and cutting methods. Users can compare the differences:
First, CNC flame cutting machine control operating procedures
1. Adjust the distance between the cutting torch and the steel plate, turn on the gas, adjust the heating flame, and cut the front line.
2. Set the thickness of the steel plate, adjust the cutting speed, confirm the torch used, and check if the machine status is normal.
3. Press the machine start button. At this point, the torch starts to descend and warm up the steel plate.
4. When the preheating oxygen time is delayed to the set time, the system will automatically open the cutting oxygen and begin perforation cutting. If the preheating oxygen time is set too long, you can use interrupted heating oxygen to forcibly interrupt the heating process of the steel plate.
5. Turn on the main power of the machine, and then turn on the computer again.
6. When the CNC system is initialized, select the program and set the relevant parameters. Such as: kerf compensation, cutting speed and so on.
7. If the steel plate on the work table is not parallel to the machine guide, you can use the steel plate correction function to correct the steel plate or use an artificial steel plate.
Second, CNC plasma cutting machine control operating procedures
1. Use the clear button to set the current point as the starting point for the cut.
2. Press the torch automatic switch.
3. Press the machine start button. At this point, the plasma begins to cut
4. Select the torch to use and move the torch to the starting point of the cut.
5. Check if it is necessary to replace the plasma torch and electrode. If the torch or electrode is damaged, it must be replaced. Adjust the plasma current, arc voltage, and cutting speed.
6. Note: In the cutting process, you can adjust the cutting speed, plasma current, voltage, in order to achieve better cutting results. When the torch moves to the edge of the steel plate, the automatic height adjustment must be turned off to prevent the torch from colliding.
Select cutting machine to China cutting machine trading network, let you buy the rest assured! A variety of CNC cutting machine and CNC cutting equipment, a variety of cutting machine models, let the optional! Official website: /
We supply full range of wiper blades, including passenger cars, trucks & buses. In addition, a wide range of adapters are supplied to fit most applications for trouble free installation, firm connections and long service life. The products contain Hybrid wiper blade, Flat(frameless, soft) wiper blade, Traditional(metal, conventional ) wiper blade, Exact fit wiper blade, Spoiler wiper blade, Heavy duty(bus & truck) wiper blade, Rear wiper blade, Wiper arm and Wiper refill.
1) Quality of Windshield Wiper Blade:Have a perfect quality control system,to produce products that customers need.We never use low quality material and cheat customer.
2) Sample lead time of Windshield Wiper Blade : If any samples in stock,can be delivery right now,if specially produced,need 3-5day usually.
3) Develop new Windshield Wiper Blade :We can develop the new wiper blade according to customer drawings and samples,so your design and patterns would also be warmly welcome.
3) Production capacity of Windshield Wiper Blade :3,000,000 pcs per month;
4) Pricing of Windshield Wiper Blade : All the price are factory price,depending on the size and material to be used;
5) MOQ of Windshield Wiper Blade : 1000 pcs, but the more quantity the cheaper;
6) Delivery sea/air port of Windshield Wiper Blade : Ningbo or Shanghai
8) more than 10 years experience :Experts of all kinds of wiper blade,leader of making wiper blades
Wiper Blade,Mitsuba Wiper Blade,Car Windshield Wiper Blade,Windscreen Wiper Blades
COMOTECH ASIA PACIFIC (HANGZHOU)CO.,LTD , http://www.capwiper.com