Marine Brass Brozne Flange Filter Y Strainer

Product Description
Marine Brass Brozne Flange Filter Y Strainer
 

1. Design and Operation: The Y-Strainers consists of a housing with opposite arranged inand outlet flanges at the same level. Between these connections is a basket strainer made of a perforated plate, optionally covered with a cloth consisting of various materials and mesh widths. The medium to be filtered will enter the filter from the inside to the outside. Hence, the contaminations will remain within the strainer insert. The Y-Strainer could be depressurizing through the venting or draining devices. After removing of the flap the complete basket strainer could be easily removed out of the filter housing. Now the strainer can be cleaned by blowing out or blasting using compressed air, steam, or water. If necessary, the strainer should be soaked and cleaned using a suitable agent. Possibly, an optimal cleaning will be obtained using ultrasonics. The housing could be manufactured by forged steel, cast iron or a weldment (pipes and flanges). Y-Strainer can be installed both in the horizontal and vertical positions without any effect on performance providing the screen is installed in the downward position to assist draining and cleaning operations.

Specifications:
   
 
Advantage and Utility:
 

1. Reasonable strainer
2. Standard types available from stock
3. Permanent filtration of the medium
4. Suitable for mounting in horizontal and vertical pipelines
5. No disassemble of the filter housing for cleaning is necessary
6. Simple handling / basket cleansing
7. Low-maintenance
8. Reusable elements
9. Contamination level indicator (optional)

 
Technical Data:
 
Medium: liquids, steams, gases or mixtures
Engineering Specification

1. Flange nominal width:  DN 15 to 1200 (1/2" to 48")
2. Operating Pressure:  PN 16 to PN 250* (ANSI 150 to ANSI 1500 lbs)*
3. Filter fineness (Mesh sizes): 400 μm* (Standard) or s per to customer's requirement
4. Connection Flanges acc. to ANSI / DIN

Material

1. Housing: 1.0169 (A216 WCB) 1.4408 (A315 CF8M)
2. Filter element: 1.4401 (316)
3. Surface treatment: one coat of red oxide* (carbon steel)
4. Fitting position: Horizontal or vertical
5. Direction of flow: lateral or from top to down

Material List:
  
Technical Specifications:
 
1. Basic design and manufacture according to ANSI B16.34.
2. Flange connection per ASME B16.5.
3. Inspection and tested according to API 598.

Other Products We Manufacture
       1  .Sanitary valve
            Sanitary Butterfly Valves
            Sanitary Check Valves
            Sanitary Ball Valvess
            Sanitary Reversal Valve
            Sanitary Diaphragm Valves
            Sanitary Sample Valves
            Sanitary Safety Valves
            Sanitary Control Valves
            Sanitary Relief Pressure Valves
        2. Sanitary Pipe Fittings
            Sanitary Elbow
            Sanitary TeeSanitary Reducer
            Sanitary Cross
            Sanitary Triclamp Ferrule
            Sanitary Cap
            Sanitary Pipe Hanger
            Sanitary Tank Cleaning Ball
            Sanitary Hose Joint
            Sanitary Unions
            Sanitary Sight Glass
            Sanitary Strainer
        3.Industry Valves
            Ball Valve
            3 Way Ball Valve
            1 PC Male/Female Thread Ball Valve
            2 PC Male/Female Thread Ball Valve
            3 PC Male/Female Thread Ball Valve
            1 PC Flange/Welding/Union Ball Valve
            2 PC Flange/Welding/Union Ball Valve
            3 PC Flange/Welding/Union Ball Valve
            Globe Valve
            Male/Female Thread Globe Valve
            Flange Globe Valve
            Gate Valve
            Male/Female Thread Gate Valve
            Flange Gate Valve
            Check Valve
            Wafer Check Valve
            Spring Check Valve
            Dual Disc/Plat Wafer Check Valve
            Swing Check Valve
            Flange Check Valve
            Butterfly Valve
            Angle Seat Valve
            Pneumatic Ball Valve
            Pneumatic Angle Seat Valve
            Electric Ball Valve
            Electric Angle Seat Valve
            Y Strainer/Filter
         4.Industry Pipe Fittings
            welded/thread Elbow
            Tee
            Cross
            Cap
            Pipe Hanger
            Hose Joint
            Unions
            Quick connector
            Quick coupling
            Ferrule
            Reducer
            Socket
            Bend
            Plug
            Bushing
            Nipple
            Y-Tee
            Y-Shaped
            Lateral-Tee
            Flange




WENZHOU RST VALVE CO., LTD
Add: No.917, Tianzhong Rd, Yongiang Hi-Tech Park, Wenzhou city, P.R.China
Mobile +86 150 8893 3713
Fax: 0086-577-86917828
Web: www.stainlesssteel-valves.com

Moulding Machine

Injection molding machine is by means of screw (or plunger) thrust, has been plasticized molten state of the plastic injection into a closed cavity, the solidification of the finished product. An Injection molding machine, also known as an injection press, is a machine for manufacturing plastic products by the injection molding process. It consists of two main parts, an injection unit and a clamping unit.

 

Three-color upper molding machine Operation Manual

This machine is specially applied to manufacture single color, double color upper and slippers sandals with PVC or TPR. Its features are as follows:

1.       Full computer controlling, humanized man-machine interface , operating panel is concise;

2.       Compared with the same kind of equipments, it saves electricity and increases efficiency;

3.       Compared with the same kind of equipments, it has larger injection capacity and clamping force;

4.       the rotation of station is characterized by continuously variable speed, has light noise and be steady;

5.       Preparing and injection device are controlled proportionally, besides, the speed, material capacity and pressure are adjustable, which ensures the quality of products;

6.       Can use it to manufacture single color, double color slippers sandals and are free to choose stations to work according to different requirements of products;

7.       Technical Parameters

Item Unit Parameters Raw material --- PVC Injection Capacity(Max) cm3   customized according to demand Heating Power kw 21 Temperature Controling point 4 Screw diameter mm According to different types of custom Screw Speed r.p.m 0-200 Rated injection pressure Mpa 85;75 Injection Stroke(Max) mm 150 Motor power kw 15;11 Clamping Force  KN According to different types of custom Mold Size(Max)  mm According to different types of custom Machine dimension mm Reference drawings Gross Weight kg 10T

Moulding Machine

Moulding Machine,Jelly Blow Molding Machine,Mold Machine Foaming Machine,Plastic Mold Machine

SHIJIAZHUANG LONGXUAN TRADING CO., LTD , https://www.longxuanmachine.com