Model NO.: TC164
Trademark: SHELLMAX
Origin: China
HS Code: 85152900
Model NO.: TC164
Trademark: SHELLMAX
Origin: China
HS Code: 85152900
INVERTER ACDC TIG/MMA/CUT MACHINE TC164IGBT advanced double inverter technology
Single phase power supply: 1X220/230/240V50/60Hz Fuse 14.7/20.7A
Light weight.
HF arc start for TIG&CUT, arc force for MMA
2T/4T and pulse control function for TIG
AC/DCTIG suitable for steel, stainless steel, aluminm.
Digital display
Can be with foot controller.
Welding cable 3m+300A holder, welding cable 3m+300A earth clamp, TIG&CUT torch 4m, gas hose 2m.
Over hot and current protection.
Input Voltage: 1x220/230/240V 50/60Hz
Input Power: 4.8KVA
No load voltage: 60~80V(Welding)/ 200V(CUTTING)
Current: 5~160A(Welding)/15~40A(Cutting) Duty cycle: 35%
Current up-slope time: 0~10s Gas post flow time: 1~25s Current down-slope time: 0~10s
SP value (balance): 30~70% AC frequency: 20~100Hz(250Hz)
| Model | TC164Â AC/DC | TC205Â AC/DC | |
| Input | voltage | AC220/230/240V 50Hz | AC220/230/240V 50Hz |
| AC TIG | No load voltage | 60-80V | 60-80V |
| Base Current Adjusting range | 20-160A | 20-200A | |
| AC balance | 30-70% | 30-70% | |
| AC square wave frequency | 20-100Hz | 20-250Hz | |
| Rated Duty Cycle | 35% | 35% | |
| DC TIG Â |
Pulse current adjusting range | 5-160A | 5-200A |
| Rated Duty Cycle | 35% | 35% | |
| Current down-slope time | 0~10S | 0~10S | |
| Base Current Adjusting range | 5-160A | 5-200A | |
| Pluse Width Ratio | 0.1~0.9 | 0.1~0.9 | |
| Pluse Frequency | 0.5~25Hz | 0.5~25Hz | |
| After flow time | 1~25S | 1~25S | |
| Arc starting Mode | High frequency arc striking | High frequency arc striking | |
| DC MMA | No load voltage | 60-80V | 60-80V |
| Base Current Adjusting range | 5-160A | 5-200A | |
| Rate output current | 160A | 200A | |
| Rated Duty Cycle | 35% | 35% | |
| CUT | (Base) Current Adjusting range | 15-40A | 15-50A |
| Rated Duty Cycle | 35% | 35% | |
| Max Cutting thickness | 8 | 12 | |
| Efficiency | ≥83% | ≥83% | |
| Weight | 49KG | 51KG | |
| Protection Class of enclosure | IP21S | IP21S | |
| Outline dimensions mm2 | 430X200X290 | 430X200X290 | |
| Accesorries | TIG welding torch WP-26/Cutting torch WSD-60/ Welding clamp/Welding holder/Gas inlet pipe/ Air pressure Regulator etc |
||
INVERTER ACDC TIG/MMA/CUT MACHINE TC164
IGBT advanced double inverter technology
Single phase power supply: 1X220/230/240V50/60Hz Fuse 14.7/20.7A
Light weight.
HF arc start for TIG&CUT, arc force for MMA
2T/4T and pulse control function for TIG
AC/DCTIG suitable for steel, stainless steel, aluminm.
Digital display
Can be with foot controller.
Welding cable 3m+300A holder, welding cable 3m+300A earth clamp, TIG&CUT torch 4m, gas hose 2m.
Over hot and current protection.
Input Voltage: 1x220/230/240V 50/60Hz
Input Power: 4.8KVA
No load voltage: 60~80V(Welding)/ 200V(CUTTING)
Current: 5~160A(Welding)/15~40A(Cutting) Duty cycle: 35%
Current up-slope time: 0~10s Gas post flow time: 1~25s Current down-slope time: 0~10s
SP value (balance): 30~70% AC frequency: 20~100Hz(250Hz)
| Model | TC164Â AC/DC | TC205Â AC/DC | |
| Input | voltage | AC220/230/240V 50Hz | AC220/230/240V 50Hz |
| AC TIG | No load voltage | 60-80V | 60-80V |
| Base Current Adjusting range | 20-160A | 20-200A | |
| AC balance | 30-70% | 30-70% | |
| AC square wave frequency | 20-100Hz | 20-250Hz | |
| Rated Duty Cycle | 35% | 35% | |
| DC TIG Â |
Pulse current adjusting range | 5-160A | 5-200A |
| Rated Duty Cycle | 35% | 35% | |
| Current down-slope time | 0~10S | 0~10S | |
| Base Current Adjusting range | 5-160A | 5-200A | |
| Pluse Width Ratio | 0.1~0.9 | 0.1~0.9 | |
| Pluse Frequency | 0.5~25Hz | 0.5~25Hz | |
| After flow time | 1~25S | 1~25S | |
| Arc starting Mode | High frequency arc striking | High frequency arc striking | |
| DC MMA | No load voltage | 60-80V | 60-80V |
| Base Current Adjusting range | 5-160A | 5-200A | |
| Rate output current | 160A | 200A | |
| Rated Duty Cycle | 35% | 35% | |
| CUT | (Base) Current Adjusting range | 15-40A | 15-50A |
| Rated Duty Cycle | 35% | 35% | |
| Max Cutting thickness | 8 | 12 | |
| Efficiency | ≥83% | ≥83% | |
| Weight | 49KG | 51KG | |
| Protection Class of enclosure | IP21S | IP21S | |
| Outline dimensions mm2 | 430X200X290 | 430X200X290 | |
| Accesorries | TIG welding torch WP-26/Cutting torch WSD-60/ Welding clamp/Welding holder/Gas inlet pipe/ Air pressure Regulator etc |
||
People can use it to find iron, mine, gold, some from natural, some are from the past. Underground Metal Detector help people's life more funs and prosperity. Some Chinese use it to detect underground metal from graves to know more history about their ancestors while people from U.S.A., Australia and Africa use it to detect natural gold. Chinese Underground Metal Detector is cheap but also good in use. And also offer 1 year warranty, it worth your choice!
Treasure Hunting Metal Detector
Treasure Hunting Metal Detector,Metal Detector For Treasure Hunting,Treasure Hunting Gold Metal Detector,Diamond Metal Detector
Shenzhen Mama Security Technology Co., Ltd. , https://www.mamasecurity.com