After adopting the latest technology, the new rice grain dryer can not only be used for drying soybeans, but also for wheat, corn, etc., but the vast majority is still used for soybeans. After a series of transformations, the equipment is equipped with New features, focusing on the introduction of technology, focus on three aspects of the transformation:
1. Modify the exhaust port of the equipment to remove the existing exhaust shutters and change them directly to the initial stage. This will increase the exhaust gas exhaust passage of the equipment to prevent the cold winter cold wind from impacting the dryer and causing the grain drying process. Uneven heating, also reduces the problem of icing caused by unventilated, reducing the number of downtime maintenance.
2. For the transformation of electrical equipment, add the plc system. After such equipment is added, it can be directly controlled by the computer. With the computer, all the conditions of the dryer equipment and the attached equipment can be detected. It can be seen clearly on the computer. If there is a failure, it will be solved with the fastest speed to ensure that every device is in the best condition during production.
3. Regarding the transformation of heat exchangers and dust removal equipment, because of the heat generated by the discharged exhaust gas, this leads to waste. How to recover the heat in the exhaust gas can reduce waste, and the willingness to settling the expansion chamber will be expanded to the original three groups. Based on the addition of four sets of heat exchangers, this will ensure that the exhaust gas will be greatly reduced, as well as taking into account the environmental issues, increase the dust removal equipment, make the exhaust gas can better meet the requirements of the country, save energy, Greatly reduce costs.
Self Locking Roll Forming Machine
Self Locking Sheet Roll Forming Machine
Descriptions of Roll Forming Machine for Roof Panel, Wall Panel:
1.This kind of Cold Roll Forming Machine is widely used for making various metal wall panels and roof panels for steel constructions, steel structure projects and containment systems etc.
2. This production line consists of feeding unit, uncoiler, feeding guide, roll forming machine, cutter, automatic stacker, hydraulic system and electric control system.
3. The line speed of this panel forming machine is 40m/min.
Components of Roll Forming Machine for Roof Panel, Wall Panel:
1) Un-coiler:
Electric un-coiler, with coil-car
Load capacity = Max.10Tons;
2) Roll forming machine:
About 18steps to form;
Material of Roller: 45# steel with chromizing on surface
Voltage:380V/50Hz; Main line speed: 40m/min;
3) Hydraulic cutter:
1) Stop to cut, Post cut,
2) Cutting tool material: Cr12, Heat treatment
4) PLC control system:
Using Mitsubishi PLC Control the quantity, length automatically, LCD screen; remote control available.
Related Products:standing seam metal roof machine,roofing sheet machine.
Self Locking Roll Forming Machine,Roll Forming Machine,Roofing Sheet Machine,Self-Locking Sheet Roll Forming Machine,Standing Seam Metal Roof Machine
Botou Xianfa Roll Forming Machine Factory , https://www.rollformingmachinecn.com