How much is the price of the National VI hoisting compression garbage truck [manufacturer]

The price of the Liberation State Six Hoisted Compression Garbage Truck is 508,000 yuan, and Chengli specializes in direct sales. The delivery cycle is fast, the purchase process is simple, and the customer bidding is supported. 2021 J6L semi-floating flat-top row and semi-cab, electric glass lift, electric Rearview mirror and driver's seat are leather ventilated seats, single DIN Beidou compatible vehicle system, middle seat, automatic adjustment arm, automatic air conditioning, 300L steel fuel tank, electro-hydraulic lift, VOSS connector, water bottle holder, cruise control , Speed ​​limit 89km/h, electronic hand throttle, Jingliu hoisting compression garbage truck is a new type of garbage collection and transportation mode emerging in China. Its main characteristics are high recycling efficiency, clean and hygienic mechanized operation, and it is widely used in streets. , Communities, parks and other areas with high environmental requirements and large amounts of garbage.

Vehicle model: CLW5180ZDZC6 Chassis model: CA1180P62K1L2A1E6Z Wheelbase: 5300mm Engine: Dachai 240 horsepower, gearbox: CA8TAX090M1 (Flange output power take-off) Rear axle: Ф378 cast bridge (1860 wheelbase) Tire: 10.00R20 type 18 layers, Special equipment: truck-mounted crane, box body, special functions for hoisting, transfer, and dumping of urban and rural domestic garbage.

Upload configuration:

Hoist configuration: The standard 8 ton folding hoist is equipped on the whole vehicle, which can rotate 360 ​​degrees, the box volume is 12 cubic meters, the push plate semi-push compression, the lifting and self-unloading, the tailgate is hydraulically locked, and it is anti-sewage leakage. , Buried trash cans in 3 or 5 squares can be hoisted, manual and automatic integrated operation mode, optional remote control with video screen operation.

Buried trash can: equipped with 3-5 square buried trash cans to save storage space. The bucket consists of two layers of inner and outer buckets. The outer bucket is buried in the ground. The inner bucket can be hoisted. There is a small door on the top of the inner bucket for easy throwing. The bottom of the trash can be opened to facilitate the smooth unloading of the trash in the compartment. The trash can has an automatic alarm function when it is full.

Mounting configuration of hoisting garbage truck:

Hoist configuration: The standard 8 ton folding hoist is equipped on the whole vehicle, which can rotate 360 ​​degrees, the box volume is 12 cubic meters, the push plate semi-push compression, the lifting and self-unloading, the tailgate is hydraulically locked, and it is anti-sewage leakage. , Buried trash cans in 3 or 5 squares can be hoisted, manual and automatic integrated operation mode, optional remote control with video screen operation.

Buried trash can: equipped with 3-5 square buried trash cans to save storage space. The bucket consists of two layers of inner and outer buckets. The outer bucket is buried in the ground. The inner bucket can be hoisted. There is a small door on the top of the inner bucket for easy throwing. The bottom of the trash can be opened to facilitate the smooth unloading of the trash in the compartment. The trash can has an automatic alarm function when it is full.

Hoisting is a trash can with a garbage truck

Trash can specifications:

1. 3 cubic meters: the outer size of the outer barrel is 1700×2500, and the volume is 5 cubic meters, and the outer size of the inner barrel is 1500×2400, and the volume is 3 cubic meters.

2, 5 cubic meters: the outer size of the outer barrel is 2000×2600, and the volume is 7 cubic meters, and the outer size of the inner barrel is 1800×2500, and the volume is 5 cubic meters.

How to use hoisting garbage truck:

When the garbage bin is 90% full, an alarm will be sent back to the garbage truck. The garbage truck will drive to the exact location according to the geographical position, open the front legs, and at the same time open the top compression box inlet sealing cover, and the crane will lift the garbage can , Then send it to the upper end of the compression box entrance, open the bottom door of the trash can, pour the trash into the compression box, start the compression box to compress, put down the trash can, close the bottom door and put it back in place, retract the boom until it is full and pull it to Landfill unloading.

Working status of hoisting garbage truck

Features of hoisting garbage trucks:

1. Hoisting garbage truck The bucket garbage truck is matched with a variety of feeding collection methods, which can not only hoist the buried bucket, but also can clear and transport 120L/240L through the side loading mechanism

Standard barrel. One machine has multiple functions, and can flexibly switch the feeding collection mode according to customer needs and the specific form of the trash can, with strong versatility.

2. Automated technology, when 90% of the garbage is loaded, it will automatically alarm and prompt the transfer truck, and the transfer truck has a standardized route, which is fully mechanized and does not require manual operation.

3. Hoisting garbage truck The bucket garbage truck adopts a rotary integrated crane, which can realize 360° continuous rotation, and can hoist the buried buckets on the left and right sides of the car body. It has strong adaptability. The configuration of two arms can make the vehicles in the same The six buried trash cans are continuously lifted in the position, and the trash cans are accurately placed at the position of the compressed material inlet, and the outriggers are adjusted to expand and contract to improve work efficiency.

4. High-pressure cleaning function and dirt suction function. The high-pressure water gun self-cleans the trash can, and drains the sewage at the bottom of the buried bucket in time through the suction pump.

5. There is a cleaning port on the left and right sides of the sewage tank, which can fully clean and discharge the sewage or sludge in the sewage tank, and dredge the drainage hole on the bottom plate of the compression chamber.

6. Diversified garbage bin collection methods: meet manual feeding, tricycle and trolley unloading, applicable to both urban and rural areas.

7. Larger loading capacity: The volume of the trash can is 5m3, which is equivalent to 16 240L trash cans at a time, and the processing efficiency is high.

8. Hoisting type garbage truck The shape of the bucket type garbage truck is more beautiful, and the garbage is not visible.

9. Hoisting garbage trucks. The garbage trucks are buried deep underground and do not emit odor. The temperature in winter is higher than the surface temperature and it is not easy to freeze.

Summary of the six hoisting compact garbage trucks in the liberation of the country:

The advantages of hoisting garbage trucks: 1. Hoisting, compression, and self-unloading are integrated; 2. One truck with large loading capacity can compress 5-6 barrels; 3.1 hoisting can operate 20-25 barrels, hoisting garbage trucks are for lifting some A new type of garbage truck developed for scenic spots and street environments. Due to the relatively large flow of people, the high rate of garbage generation, and the places where vehicles are not easy to frequent, these are its potential advantages, and the main feature is the degree of automation mentioned above. High, large loading capacity, etc.


Conical Twin Screw & Barrel

Conical Twin Screw & Barrel,Conical Screw Barrel,Conical Twin Screw Barrel,Conical Alloy Screw Barrel

ZHOUSHAN HONGTUO COMPANY , https://www.hongtuoscrew.com

This entry was posted in on