Computer Display Tensile Testing Machine (WEW-600B)

  • Model NO.: WEW-600B
  • Accuracy Grade: 1
  • Control: Manual Control
  • Power Source: AC380V
  • Column Number: 4
  • Transport Package: Wooden Case
  • HS Code: 9024101000
  • Maxcapacity: 600kn
  • Display: Computer
  • Weight: 2600kg
  • Oil Cylinder Position: Under
  • Lead Screw Number: 2
  • Origin: Zhejiang
WEW-600B Computer Display Tensile Testing Machine

1. Introduction

This series Computer Display Tensile Testing Machine designed of PC display and manual drive hydraulic loading system, main engine controller separately fixed. It has the characteristics of operation amenity, working steady, high accuracy and loading steady. It is used to stretch, compress, curve and cut metal cement, concrete, plastics and so on.

2. Function

It is cylinder underneath type with double testing spaces structure. It can do many kinds of test, like tensile, bending, compression, shearing, and so on.

3. Structure

The main engine consist of an adjustable support (base, screw thread pole, moveable crossbeam (lower clamp set)) and a working frame (working oil tank, piston, platform, support crossbeam (upper clamp set)). Element of the machine: High-pressure oil pump supply oil to the working oil tank, the piston moves and press board and upper crossbeam to do stretch and press test. The stretch test is done in the space between upper crossbeam and movable crossbeam. The life motor, gear, chain drive rotate at a same speed to move the crossbeam.

4. Software

(1) The secrete two-grade authorization managemant

(2) Motion display load, position, tensile at the same time

(3) Load, position, tensile peak value display during the test and after

(4) Motion display load, position, tensile when testing

(5) Motion X-Y curve and user curse: Pressure-tensile, load-position, pressure-position, load-tensile, load-time, position-time, and so on.

(6) Automatically save the sensor information in doc

(7) Automatically save the test result for statistical calculation and output to data sheet and data base program, like ACCESS and EXCEL.

(8) Single page printing for the test report, including X-Y curve.

(9) Select from the analysis of predefined: Load peak value, pressure peak value, tensile strength, RP0.2, Rt0.5, ReL, value of extending to fracture value (manual and automatic), and so on

(10) Detail instruction, save and inquiry test setting to min. Error and save the time

(11) Units: N, kgf, lb, mm, in, or others

(12) Calibrating: Adjust the hardware like measuring cell by software

(13) Grip device: People can change the common movable jaw to fit the different width when doing the tensile test. Same for bending and compression test device.
Model & specification WEW-600B
Max. test force (KN) 600
Measuring range (KN) 4%-100% F.S.
Relative error to force value (%) ±1
Distance between compression surfaces (mm) 0-700
Max. distance between tensile jaw (mm) 0-700
Bending test pressed rolling distance (mm) 30-600
Clip diameter of round sample (mm) 13-40
Clip thickness of flat sample (mm) 0-30
Width of flat plate specimen (mm) ≤70
Size of shearing specimen (mm) 0-20
Effective distance between the pillars (mm) 505
Piston stroke (mm) 200
Motor power (kW) 2.2+0.55
Main frame outline dimension (mm) 820×540×2180
Oil source control cabinet outline dimension (mm) 1080×650×1200
Weight (about) (Kg) 2600

Computer Display Tensile Testing Machine (WEW-600B)
Computer Display Tensile Testing Machine (WEW-600B)
Computer Display Tensile Testing Machine (WEW-600B)
Computer Display Tensile Testing Machine (WEW-600B)





 

Melt-blown microfibers generally have diameters in the range of 2 to 4 mm, although they may be as small as 0.1mm and as large as 10 to 15mm. Differences between melt-blown nonwoven fabrics and other nonwoven fabrics, such as degree of softness, cover or opacity, and porosity can generally be traced to differences in filament size. The most commonly accepted and current definition for the melt-blown process is: a one-step process in which high-velocity air blows a molten thermoplastic resin from an extruder die tip onto a conveyor or take-up screen to form a fine fibrous and self-bonding web.The melt-blown process is similar to the spunbond process in that both convert resins to nonwoven fabrics in a single integrated process. 

Melt Blown Spinneret

The Spinnerets,High Precision Spinneret,High Strength Melt Blown Spinnerets,Melt Blown Spinneret

Changzhou Jier Precision Machinery Manufacturing Co., Ltd. , https://www.jier-spinneret.com

This entry was posted in on