China Manufacturer Wired Alarm Gas Detector with Solenoid Kl-Qg07

            Wired Gas Detector with Solenoid In Alarm China Manufacturer KL-QG07

1,Product Description



 
       
2,Installation

It installed near by gas source within 1.5mand well ventiated place.
(1)     LPG is heavier than air,so install it at 0.3m above ground
(2)     CNG , city gas.CO is lighter than air ,so put it at 0.3 below ceiling
Don't install it at corner ,cupboard,cabinet etc where the air doesn't flow well or the position of much oil fume
 
3,Use
 
1) Power:  green,blinking after power on and go out when alarming
Alarm:  red or yellow light when alarming and go out when stop alarming
Test :   press it down and green light turn off, alarm light turn on and buzzer sounds "D,D,D…"at same time
2) After power on,green light start blinking and last 3 minutes then the system enters normal working condition
3) When the concentration of gas reaches the alarm value,detector will start alarming,then green light turn off, alarm light turn on and buzzer sounds "D,D,D…"at same time, it will stop after the concentration of gas under alarm value
4) If detector come with manipulator or magnetic valve ,when it alarming,they will shut the gas source valve at time
5) If detector come with wired networking funtion,monitoring station will receive NO/NC signal when alarming; wireless detector will transmitting 2~3 signal

6) Please connect as above diagram,wrong connection will make it can't work as usual ,specially when you connect helpful valve or fan ,take attention the color of wires.


4,Help
 
1) Open the door and window, cut off the source of gas,don't turn on/off power switch which will triger fire even explode.
2) Report to related department and ask them must call professional to check them right now.
 
5,Parameter
 
Working voltage:AC220V/AC110; DC9V-16V
Standby power:<0.5W
Alarm concentration:LPG 0.1%~0.5%;CNG 0.1%~1%;City gas(H2)0.1%~0.5%; CO 0.1‰~0.4‰
Response time :≤30S
Alarm volume :≥70dB
Environment  :humidity ≤97RH
Temperature :-15ºC-+50
 
6,Attention

1)  It can work well for 3 years with high quality ,please replace new one in time to keep safe
2)  One year warranty for any quality defect during this period, don't including case,marker etc man-made damage
 

7,Shipping

1) Express: DHL, FedEx, UPS, TNT, EMS, etc.
2) By air
3) By sea
4) By special line
Depends on buyer's requirement.


8,FQA:

 1) What is your warranty period?

Generally, we provide 1 year warranty for all our products unless otherwise mentioned. (Some are 2 years.)
For DOA (Defective On Arrival) items, which will be replaced or refund, please inform us within 3 days of arrival, please also keep all components and original packaging as further checking maybe required, faulty items must be returned for repair or exchange.

2) If i don't know how to use the products, what can i do?

Pls contact us whenever you need our help, even we are not online. 
You can write email to us, or contact us byTrademanager, Skype, and other IM tools. 
We are all very glad to answer your questions. 

3) What certifications do you have?

Most of our products are approved with CE certification, some are with FCC. 
If you have any other requriements with certifications, we also would like to help you. 






http://szklvn.en.made-in-china.com/
 

            Wired Gas Detector with Solenoid In Alarm China Manufacturer KL-QG07

1,Product Description



 
       
2,Installation

It installed near by gas source within 1.5mand well ventiated place.
(1)     LPG is heavier than air,so install it at 0.3m above ground
(2)     CNG , city gas.CO is lighter than air ,so put it at 0.3 below ceiling
Don't install it at corner ,cupboard,cabinet etc where the air doesn't flow well or the position of much oil fume
 
3,Use
 
1) Power:  green,blinking after power on and go out when alarming
Alarm:  red or yellow light when alarming and go out when stop alarming
Test :   press it down and green light turn off, alarm light turn on and buzzer sounds "D,D,D…"at same time
2) After power on,green light start blinking and last 3 minutes then the system enters normal working condition
3) When the concentration of gas reaches the alarm value,detector will start alarming,then green light turn off, alarm light turn on and buzzer sounds "D,D,D…"at same time, it will stop after the concentration of gas under alarm value
4) If detector come with manipulator or magnetic valve ,when it alarming,they will shut the gas source valve at time
5) If detector come with wired networking funtion,monitoring station will receive NO/NC signal when alarming; wireless detector will transmitting 2~3 signal

6) Please connect as above diagram,wrong connection will make it can't work as usual ,specially when you connect helpful valve or fan ,take attention the color of wires.


4,Help
 
1) Open the door and window, cut off the source of gas,don't turn on/off power switch which will triger fire even explode.
2) Report to related department and ask them must call professional to check them right now.
 
5,Parameter
 
Working voltage:AC220V/AC110; DC9V-16V
Standby power:<0.5W
Alarm concentration:LPG 0.1%~0.5%;CNG 0.1%~1%;City gas(H2)0.1%~0.5%; CO 0.1‰~0.4‰
Response time :≤30S
Alarm volume :≥70dB
Environment  :humidity ≤97RH
Temperature :-15ºC-+50
 
6,Attention

1)  It can work well for 3 years with high quality ,please replace new one in time to keep safe
2)  One year warranty for any quality defect during this period, don't including case,marker etc man-made damage
 

7,Shipping

1) Express: DHL, FedEx, UPS, TNT, EMS, etc.
2) By air
3) By sea
4) By special line
Depends on buyer's requirement.


8,FQA:

 1) What is your warranty period?

Generally, we provide 1 year warranty for all our products unless otherwise mentioned. (Some are 2 years.)
For DOA (Defective On Arrival) items, which will be replaced or refund, please inform us within 3 days of arrival, please also keep all components and original packaging as further checking maybe required, faulty items must be returned for repair or exchange.

2) If i don't know how to use the products, what can i do?

Pls contact us whenever you need our help, even we are not online. 
You can write email to us, or contact us byTrademanager, Skype, and other IM tools. 
We are all very glad to answer your questions. 

3) What certifications do you have?

Most of our products are approved with CE certification, some are with FCC. 
If you have any other requriements with certifications, we also would like to help you. 






http://szklvn.en.made-in-china.com/
 

Flat Mask Making Machine

Flat Mask Making Machine,Face Mask Making Machine,Surgical Mask Making Machine,Kf94 Mask Making Machine

SINGSUN ELECTRONIC SCIENCE & TECH CO.,LTD , https://www.singsunautomatic.com