Why should chemical analysis be carried out in time during the mineral processing?

Mineral processing products can only correctly know the production effect through chemical analysis. At the same time, some products such as flotation concentrates and magnetic separation concentrates need to know the concentrate grade for a short time in order to improve the operation and adjust the production process. It is usually tested in two hours in each production class and four times in eight hours. This is the rapid chemical analysis of concentrate grades for critical operations. The normal laboratory analysis is the chemical analysis of raw ore, concentrate, and tailings once per shift. In order to obtain the production status of each link in production, some factories also carry out sampling and testing of intermediate products. The chemical analysis of the product should not only be timely but also accurate, so that the production results of the product can be obtained and the production operation can be guided.

Safety Harness Accessories are thoes stuff which are widely used with Safety Harness.Such like fall-protection lanyard,carabiners,elastic ropes,buckles,etc.

Lanyard is quite popular equipment,it has various types by different End Fittings.

Carabiners is a connection link which is usually made by steel or high strength aliminum.

They are not the main parts of safety harness,however a safety harness only has more functions with its suitable accessories.

Safety Harness Accessories



Safety Harness Accessories

Aluminum Safety Harness Accessories,Carabiner Safety Harness Accessories,Steel Safety Harness Accessories

WINNERLIFTING(H.K.)INT'L TRADING LIMITED. , https://www.ratchetstrap.de

This entry was posted in on