Sprinkler car window winter maintenance

Is it necessary to pay special attention to the use of sunroof after the winter? Need special care? The answer is yes! There are misunderstandings in the use and maintenance of many sunroof sunroofs, especially in the north. The winter is unusually cold, and the cold wind whistles with mud. So many sprinkler drivers never open the sunroof in the winter, or even open the side windows. It varies from person to person, such as: cold weather, dust, ice after car wash, etc. In fact, even in the winter, long days are needed to open the skylight. This has many advantages. Apart from allowing the driver of the sprinkler to be close to nature, it can also maintain the air environment inside the car and reduce noise and eliminate fog. Cold-water sprinklers may rarely open the skylight for ventilation throughout the winter, resulting in poor air quality in the vehicle. Some people may ask: "I am afraid of being cold. Have you been driving?"

 

 

Winter sprinkler driver sunroof use please note the following:

 

1 , winter car wash, even if the hot water car wash if not fully wiped, sprinkler drivers in the driving edge of the skylight will remain frozen, so after the car wash should open and close the sunroof to dry around.

 

2. Due to the high temperature inside the sprinkler, the ice and snow around the skylight melt, and after overnight start, the sunroof glass and sealant frame can be easily frozen. If forcibly opening the sunroof, the sunroof motor and the rubber seal can easily be damaged. The temperature rise confirmed thawing and then open the sunroof.

 

3 , sprinkler sunroof sealing strip surface after painting or flocking treatment, in order to avoid freezing, paint treatment tape is best to dry with a soft cloth, and then coated with some talcum powder. The flocking tape (with black velvet on the surface) can be wiped dry, do not stick with oil.

 

4. There are sliding rails on the sprinkler windows. During the winter, the slide rails should be cleaned regularly to avoid sand deposits. After cleaning, apply a little oil. Do not lubricate.

 

5 , if there are other problems with the sunroof truck manufacturers repair station, in order to avoid losses.

Waterjet Cutting sand,  abrasive sand, Garnet Sand used for waterjet cutting of stainless steel, aluminum, carbon steel plate, copper, titanium alloy and other metal materials, tile, stone, rubber, glass, wood Wait. Special application glass cutting, mobile phone screens, semiconductors, etc.

High quality waterjet garnet sand usually has the following characteristics for your reference:

1. High quality garnet sand for waterjet cutting usually has a fast cutting speed and a more strait and smoother cutting surface; 

2.The high quality garnet water cutting sand has been washed, sieved and magnetically selected several times. Ensure that the product is clean and free of dust and fine particles, as these impurities are not cut.

3. The high-quality garnet waterjet sand has no water-blocking cutter heads, which ensures the continuous and stable operation of the water jet equipment.

in water jet cutting, we always use 60 mesh sand, 80 mesh sand, 120 mesh sand and 140 mesh sand.

Abrasive Garnet Sand

Garnet Sand,Garnet Sand For Waterjet Cutting,Water Jet Garnet Sand,Abrasive Garnet Sand

HARBIN QIAN FAN XI FENG MACHINERY CO.LTD , http://www.waterjetwamit.com