This machine have a free line loop device in the loop device in thr front needle board,it make free loop inside over lock seaming ,reduce bar tacking ,process and install the device of needle thread ,it may loosen two needle thread in the same time when raising presser foot,it is suitable for underwear ,T-shirt and so on.
Electronics Production Machinery
SF-580is a Automatic Lead Cutting And Bending Triode Forming Machine.Size:1500x1000x1500
1.Apply to LED/light emitting diode,Triode Forming Cutting Machine,aluminum electrolytic capacitor,metallic film capacitor,safety capacitor,quartz crystal and other upright type elements.
2. Import CAM mechanical transmission,precise stable,durable and low noise. Each part has the special hard coating with long service life.
3. The led Lead Forming Machine whole set of system is used PLC control with ultra strong stability.The operator interface is touch screen convenient and easy to lean and the data alignment is more convenient.
4. Speed control of the non-phase fine adjustment of transducer.
5. Upper clipand open clip system are rack and pinion type.The change of fixture centerline is invariant,no harm by clipping and more convenient to change the specification.(D4--(D6are shared the same fixture and(D8-(D10are shared the same fixture.
6. Molding pitch:2.0mm,2.5mm,5mm,7.50mm,10mm,15mm,20mm,25mm
7. Molding/feet cut method:odd leg,90℃bending,incurvature, excurvation and vertical angle,etc.
8. Length of feet cut:2.5mm-28mm.
9. Working pressure:4kg/Cm2
10.The special molding pattern can be customized according to the clients different requirements.
11. The equipment is anti-static.
The Bulk Resistor Radial Cutting Machine is suitable for shaping and cutting feet of various electronic components.Any details you want to know about Automatic Lead Forming Machine please contact us for further more.
Electronics Production Machinery
SINGSUN ELECTRONIC SCIENCE & TECH CO.,LTD , https://www.szsingsunautomatic.com