The reason for the high arsenic content in the soot (see Table 2 ) is that the temperature of the hot dust collector is not enough (only
Table 2 Â Ingredients % of concentrate vacuum processing products
product | As | S | Fe | SiO 2 | Al 2 O 3 | CaO | MgO | C |
Concentrate | 6.20 | 15.10 | 16.60 | 24.70 | 8.80 | 0.40 | 0.40 | 18.60 |
Slag | 0.20 | 14.20 | 19.20 | 29.10 | - | 0.50 | 0.50 | 22.50 |
Condensate | 61.40 | 20.60 | 0.30 | 6.90 | - | - | - | - |
Smoke | 7.30 | 12.50 | 13.60 | 23.70 | 6.90 | - | - | - |
During the vacuum heat treatment, 91.8~92% of the gold is transferred into the slag, 7.8~8% of the gold is transferred to the soot, and about 5% of the gold enters the condensate. About 6% of the silver lost with the condensate loss and balance error . Test electricity consumption of 300 to 350 kilowatts. Hr / ton of ore.
Based on the results obtained, the raw data of the industrial vibrating vacuum device design was compiled to separate arsenic from the gold-bearing concentrate by vacuum pyrolysis.
Hightop Machinery is the worldwide leading manufacturing company of Polyurethane spary Foam and Polyurea Spray machine
Hightop Machinery offers reliable, compact and innovatively designed spray foam machinery and guns
Spray foam machine is ideal for small to midrange output foam applications such as interior stud-wall spraying, widely used in embankment waterproof, pipeline corrosion, auxiliary cofferdam, tanks, pipe coating, cement layer protection, wastewater disposal, roofing, basement waterproofing, industrial maintenance, wear-resistant linings, cold storage insulation, wall insulation, refrigerator injection, solar water heater foam injection .
A variety of mixing chamber sizes allows the operator to fine-tune the round spray pattern for virtually any application
Lightweight, easy to operate and maintain
If you're thinking about getting into spray foam insulation, do it right. Hightop Spray foam machine gives you the reliable performance your company demands. Don't settle for anything less.
Spray Foam Machine model :
Hightop Machinery is the worldwide leading manufacturing company of Polyurethane spary Foam and Polyurea Spray machine
Hightop Machinery offers reliable, compact and innovatively designed spray foam machinery and guns
Spray foam machine is ideal for small to midrange output foam applications such as interior stud-wall spraying, widely used in embankment waterproof, pipeline corrosion, auxiliary cofferdam, tanks, pipe coating, cement layer protection, wastewater disposal, roofing, basement waterproofing, industrial maintenance, wear-resistant linings, cold storage insulation, wall insulation, refrigerator injection, solar water heater foam injection .
A variety of mixing chamber sizes allows the operator to fine-tune the round spray pattern for virtually any application
Lightweight, easy to operate and maintain
If you're thinking about getting into spray foam insulation, do it right. Hightop Spray foam machine gives you the reliable performance your company demands. Don't settle for anything less.
Spray foam machine model :
|
Model |
CNMC-26 |
CNMC-E |
|
Power source |
3-phase 4-wires 380V 50Hz |
single phase 220V 50Hz |
|
Heating powe |
11KW |
7.5KW |
|
Driven mode |
pneumatic |
pneumatic |
|
Air source |
0.5~0.8 MPa ≥0.9m3/min |
0.5~0.8 MPa ≥0.9m³/min |
|
Raw output |
2~12 kg/min |
2~12 kg/min |
|
Maximum output pressure |
11MPA |
11MPA |
|
AB material output ratio |
1:1 |
1:1 |
|
Spray gun |
1 Set |
1 Set |
|
Feeding pump |
2 sets |
2 sets |
|
Heating hose |
15meters |
15meters |
|
Gun connection pipe |
2pieces |
2pieces |
|
Feed delivery pipe |
2pieces |
2pieces |
|
Feeding pump |
2 sets |
2 sets |
|
Heating hose |
15meters |
15meters |
|
Gun connection pipe |
2pieces |
2pieces |
|
Feed delivery pipe |
2pieces |
2pieces |
|
pneumatic pipe |
5meters |
5meters |
|
Spare parts |
1set |
1set |
|
Packing size |
850mm X 1000mm X 1300mm |
850mm X 1000mm X 1300mm |
|
Machine weight |
136KG |
136KG |
|
pneumatic pipe |
5meters |
5meters |
|
Spare parts |
1set |
1set |
|
Packing size |
910mm X 890mm X 1330mm |
750mm X 560mm X 1130mm |
|
Machine weight |
116KG |
109KG |
|
Model |
CNMC-D |
CNMC-H |
|
Power source single phase 220V 50Hz |
3-phase 4-wires 380V 50Hz |
|
|
Heating powe |
7.5KW |
9.5KW |
|
Driven mode |
pneumatic |
pneumatic |
|
Air source |
0.5~0.8 MPa ≥0.9m³/min |
0.5~0.8 MPa ≥0.9m³/min |
|
Raw output |
2~12 kg/min |
2~12 kg/min |
|
Maximum output pressure |
11MPA |
11MPA |
|
AB material output ratio |
1:1 |
1:1 |
|
Spray gun |
1 Set |
1 Set |
|
Feeding pump |
2 sets |
2 sets |
|
Heating hose |
15meters |
15meters |
|
Gun connection pipe |
2pieces |
2pieces |
|
Feed delivery pipe |
2pieces |
2pieces |
|
pneumatic pipe |
5meters |
5meters |
|
Spare parts |
1set |
1set |
|
Packing size |
760*550*1130 |
760mm X 560mm X 1130mm |
|
Machine weight |
109KG |
109KG |
|
Model |
CNMC52 |
CNMC56 |
|
Power source |
3-phase 4-wires 380V 50Hz |
3-phase 4-wires 380V 50Hz |
|
Heating powe |
18KW |
20KW |
|
Driven mode |
pneumatic |
pneumatic |
|
Air source |
0.5~0.8 MPa ≥1.3m³/min |
0.5~0.8 MPa ≥1.3m³/min |
|
Raw output |
2~12 kg/min |
2~12 kg/min |
|
Maximum output pressure |
22MPA |
24MPA |
|
AB material output ratio |
1:1 |
1:1 |
|
Spray gun |
1 Set |
1set |
Spray Foam Machine
Spray Foam Machine,Polyurethane Foaming Machine,Spray Foam Equipment,Spray Foam Insulation Machine
Shandong Hightop Machinery Co,.Ltd , https://www.hightopmachinery.com