Model NO.: C6266Yx2000
Automatic Grade: Semiautomatic
Setting Mode: Floor-type
Precision: High Precision
Certification: CE
Condition: New
control voltage: 24V
max swing over bed: 660mm
max workpiece length: 2000mm
spindle bore dia: 103mm
Trademark: HYMT
Transport Package: Wooden Case
Specification: swing over bed 660x2000mm
Origin: China
HS Code: 84581900
Model NO.: C6266Yx2000
Automatic Grade: Semiautomatic
Setting Mode: Floor-type
Precision: High Precision
Certification: CE
Condition: New
control voltage: 24V
max swing over bed: 660mm
max workpiece length: 2000mm
spindle bore dia: 103mm
Trademark: HYMT
Transport Package: Wooden Case
Specification: swing over bed 660x2000mm
Origin: China
HS Code: 84581900
MAIN FEATURES:Â Big spindle bore is 103 mm;
Precision ground;
Clutched head stock;
CE-conformity;
Safety torque limiting device for lead screw;
Safety overload clutch for feedrod;
Rapid traverse (optional);
Main spindle supported at 2 points with predision taper roller bearings;
2500-3000mm Lathe with follow chip cuard;
Super-audio frequency hardened (more than HB400);
Removable gap.
Standard accessories:
3 jaw chuck
Driving plate
Center and center sleeve
Wrenches
Oil gun
Operation manaul
Optional accessories:
Live center
Quick change toolpost
Taper copy ruler
Steady rest and follow rest
Face plate
Thread dial
4 jaw chuck
Longitudinal automatic trip.
Main specifications:
Precision ground;
Clutched head stock;
CE-conformity;
Safety torque limiting device for lead screw;
Safety overload clutch for feedrod;
Rapid traverse (optional);
Main spindle supported at 2 points with predision taper roller bearings;
2500-3000mm Lathe with follow chip cuard;
Super-audio frequency hardened (more than HB400);
Removable gap.
Standard accessories:
3 jaw chuck
Driving plate
Center and center sleeve
Wrenches
Oil gun
Operation manaul
Optional accessories:
Live center
Quick change toolpost
Taper copy ruler
Steady rest and follow rest
Face plate
Thread dial
4 jaw chuck
Longitudinal automatic trip.
Main specifications:
| Specifications |
C6266Y Â |
C6266Y | C6280Y | |
| Capacity | Swing over bed | 600 mm | 660 mm | 800 mm |
| Swing over cross slide | 375mm | 435mm | 545mm | |
| Swing in gap | 800 mm | 860 mm | 1000 mm | |
| Valid length of gap | 280 mm | |||
| Max. length of work piece | 1000, 1500, 2000, 3000 mm | |||
| Width of bedways | 400 mm | |||
| Headstock | Spindle nose | ISO-C11 or ISO-D11 | ||
| Spindle bore | 103 mm | |||
| Range of spindle speeds(Nnber | (ccw/18): 9-1275rpm, 18step / (cw/6): 16-816rpm, 6step | |||
| Feeds and Threads  |
Max. travel of compound rest | 110 mm | ||
| Max. travel of cross slide | 325 mm | |||
| Longitudinal leadscrew pitch | 12 mm or 2TPI | |||
| Section of tool | 32 × 32 mm | |||
| Longitudinal feeds range | 72 kinds 0.073-4.066 mm/rev | |||
| Cross feeds range | 72 kinds 0.036-2.033 mm/rev | |||
| Metric threads range | 72 kinds 0.5-112 mm/rev | |||
| Inch threads range | 72 kinds 56-¼ t/inch | |||
| Module threads range | 36kinds 0.5-7 mm/rev | |||
| Diametral threads range | 36kinds 56-4Dp | |||
| Tailstock | Dia. of tailstock sleeve | 90 mm | ||
| Morse taper of tailstock sleeve | Morse No. 6 | |||
| Taper of tailstock sleeve | 150 mm | |||
| Cross adjustment range | 10 mm | |||
|  Motor | Power of main motor | 7.5 or 10 kw | ||
| Power of quick-travel motor | 250 W | |||
| Power of coolant pump | 90 W | |||
| Power supply aplicable | 220V, 380V, 420V (50HZ, 60HZ) | |||
| Packing size (L × W × H) |
1000 mm |
2820 × 1300 × 2100 mm | ||
| 1500 mm | 3320 × 1300 × 2100 mm | |||
| 2000 mm | 3820 × 1300 × 2100 mm | |||
| 3000 mm | 4820 × 1300 × 2100 mm | |||
|
NET / Gross Weight (kg) |
1000 mm | 2900/3500 | 3000/3600 | 3150/3750 |
| 1500 mm | 3150/3750 | 3250/3850 | 3400/4000 | |
| 2000 mm | 3400/4050 | 3500/4150 | 3650/4300 | |
| 3000 mm | 3800/4450 | 3900/4550 | 4050/4700 | |
Our services:
1.Standardization of Service "212"
2: response in 2 hours
1: provide solution in 1 day
2: solve complaint in 2 days
2.Installation Service
Installation Services are available with all HYMT machines. We dispatch technician to customer'sÂ
factory for installation and preoperation of machines.
factory for installation and preoperation of machines.
3.Training Service
Our technician is available to your factory and offer training of how to use our machines. As well, you
 may send your technician to our company to learn how to operate machines.
 may send your technician to our company to learn how to operate machines.
4.Quality Guarantee
We guarantee the quality of machine (e.g. processing speed and working performance is the same as the data of samples making). We sign the agreement with detailed technical data.
We arrange final test before shipment. We run the machine for a few days, and then use customer's materials for test. After making sure machine is the best performance, then make shipments.
MAIN FEATURES:Â Big spindle bore is 103 mm;
Precision ground;
Clutched head stock;
CE-conformity;
Safety torque limiting device for lead screw;
Safety overload clutch for feedrod;
Rapid traverse (optional);
Main spindle supported at 2 points with predision taper roller bearings;
2500-3000mm Lathe with follow chip cuard;
Super-audio frequency hardened (more than HB400);
Removable gap.
Standard accessories:
3 jaw chuck
Driving plate
Center and center sleeve
Wrenches
Oil gun
Operation manaul
Optional accessories:
Live center
Quick change toolpost
Taper copy ruler
Steady rest and follow rest
Face plate
Thread dial
4 jaw chuck
Longitudinal automatic trip.
Main specifications:
Precision ground;
Clutched head stock;
CE-conformity;
Safety torque limiting device for lead screw;
Safety overload clutch for feedrod;
Rapid traverse (optional);
Main spindle supported at 2 points with predision taper roller bearings;
2500-3000mm Lathe with follow chip cuard;
Super-audio frequency hardened (more than HB400);
Removable gap.
Standard accessories:
3 jaw chuck
Driving plate
Center and center sleeve
Wrenches
Oil gun
Operation manaul
Optional accessories:
Live center
Quick change toolpost
Taper copy ruler
Steady rest and follow rest
Face plate
Thread dial
4 jaw chuck
Longitudinal automatic trip.
Main specifications:
| Specifications |
C6266Y Â |
C6266Y | C6280Y | |
| Capacity | Swing over bed | 600 mm | 660 mm | 800 mm |
| Swing over cross slide | 375mm | 435mm | 545mm | |
| Swing in gap | 800 mm | 860 mm | 1000 mm | |
| Valid length of gap | 280 mm | |||
| Max. length of work piece | 1000, 1500, 2000, 3000 mm | |||
| Width of bedways | 400 mm | |||
| Headstock | Spindle nose | ISO-C11 or ISO-D11 | ||
| Spindle bore | 103 mm | |||
| Range of spindle speeds(Nnber | (ccw/18): 9-1275rpm, 18step / (cw/6): 16-816rpm, 6step | |||
| Feeds and Threads  |
Max. travel of compound rest | 110 mm | ||
| Max. travel of cross slide | 325 mm | |||
| Longitudinal leadscrew pitch | 12 mm or 2TPI | |||
| Section of tool | 32 × 32 mm | |||
| Longitudinal feeds range | 72 kinds 0.073-4.066 mm/rev | |||
| Cross feeds range | 72 kinds 0.036-2.033 mm/rev | |||
| Metric threads range | 72 kinds 0.5-112 mm/rev | |||
| Inch threads range | 72 kinds 56-¼ t/inch | |||
| Module threads range | 36kinds 0.5-7 mm/rev | |||
| Diametral threads range | 36kinds 56-4Dp | |||
| Tailstock | Dia. of tailstock sleeve | 90 mm | ||
| Morse taper of tailstock sleeve | Morse No. 6 | |||
| Taper of tailstock sleeve | 150 mm | |||
| Cross adjustment range | 10 mm | |||
|  Motor | Power of main motor | 7.5 or 10 kw | ||
| Power of quick-travel motor | 250 W | |||
| Power of coolant pump | 90 W | |||
| Power supply aplicable | 220V, 380V, 420V (50HZ, 60HZ) | |||
| Packing size (L × W × H) |
1000 mm |
2820 × 1300 × 2100 mm | ||
| 1500 mm | 3320 × 1300 × 2100 mm | |||
| 2000 mm | 3820 × 1300 × 2100 mm | |||
| 3000 mm | 4820 × 1300 × 2100 mm | |||
|
NET / Gross Weight (kg) |
1000 mm | 2900/3500 | 3000/3600 | 3150/3750 |
| 1500 mm | 3150/3750 | 3250/3850 | 3400/4000 | |
| 2000 mm | 3400/4050 | 3500/4150 | 3650/4300 | |
| 3000 mm | 3800/4450 | 3900/4550 | 4050/4700 | |
Our services:
1.Standardization of Service "212"
2: response in 2 hours
1: provide solution in 1 day
2: solve complaint in 2 days
2.Installation Service
Installation Services are available with all HYMT machines. We dispatch technician to customer'sÂ
factory for installation and preoperation of machines.
factory for installation and preoperation of machines.
3.Training Service
Our technician is available to your factory and offer training of how to use our machines. As well, you
 may send your technician to our company to learn how to operate machines.
 may send your technician to our company to learn how to operate machines.
4.Quality Guarantee
We guarantee the quality of machine (e.g. processing speed and working performance is the same as the data of samples making). We sign the agreement with detailed technical data.
We arrange final test before shipment. We run the machine for a few days, and then use customer's materials for test. After making sure machine is the best performance, then make shipments.
Cooling Bed,Re-Rolling Mill,Rolling Mill
Continuous Casting Mach Co., Ltd. , http://www.nsstraightener.com