Fried ice machine consists of compressor, frying ice condenser, evaporator, slender tube, filter, characterized in that one end of the compressor is connected with the inlet end of the condenser, the other end is connected with the outlet end of the evaporator, the condenser The outlet end of the filter is connected with the inlet end of the filter, the inlet end of the evaporator is connected with the outlet end of the capillary, the outlet end of the filter is connected with the inlet end of the capillary tube, the evaporator is composed of a coil and a wok, Wrapped around the wok pan at the bottom of the condenser with forced condenser cooling fan. Among them, the three imperial food machinery will be fried ice machine and ice porridge machine combined into a combination of cold drinks, fried ice machine and porridge machine two organic combination of machine, more convenient and more practical. Fried ice machine works Stroll the lively summer night market in the city, all kinds of delicious food assortment, colorful, fried ice machine combination of which is extremely attractive combination of cold drinks is full of blessing, but also remove the summer cold - fried ice. Fried ice is a special frying pan, that is, rapid freezing pan. This special wok, in half a minute, the temperature dropped to -15 ℃. The working principle of ice machine is also very simple to understand, as follows: Fried ice machine compressor refrigerant compression (the gas into liquid), the gas pressure of the refrigerant into a liquid under high pressure will be released after the heat, through the heat inside the ice machine cooling ice (the equivalent of absorbing cold air). Then the refrigerant is released to the internal condenser of the ice-frying machine through the expansion valve. At this time, the refrigerant flowing inside is a low-pressure liquid, and the refrigerant turns into a gas from the liquid to absorb the heat, thereby lowering the temperature inside the frying pan To the cooling function. Then the gas refrigerant and then over compressor compression. Fried ice machine use. Fried ice machine can be used to make fried ice, fried ice fruit, fried snow cream and other products. Common fried ice machine classification According to the number of pots can be divided into single-pan fried ice machine and double pan fried ice machine, bucket fried ice machine, ice bucket with six buckets. According to the pot shape can be divided into round pan fried ice fried ice machine And the pan fried ice machine. One double-fried ice machine is divided into single-pressure single-control, single-pressure dual control and dual-pressure dual-control three, single-pan fried ice machine has two sizes. In addition, there is a combination of cold drinks cart, fried ice machine is the perfect combination of ice porridge machine. Fried ice machine use precautions 1. The weather has a certain impact on the speed of fried ice 2. The boot will keep stirring, so that the middle of the pot and the pot full of hot and cold water around the exchange, faster freezing 3. 220 machine using ordinary household lighting power, if not 220 determines whether the voltage can be achieved, with unsolicited regulator (put all around are counted in the electric power facilities buy regulator), the electrical machine 2 ( 220), less than 180 does not start, higher than 250 automatic thermal protection. High voltage at the end of fried ice speed also have an impact, please note 4. Cable can not be too long, with 4 square air-conditioning dedicated line 5. The machine can not be inverted, after receiving the goods must be placed 12 hours -24 hours 6. Switching machines can not be frequent 7. Turn off the power when not in use 8. The use of half-way blackouts must press the switch, if you do not press out, the instantaneous current increases, the compressor can not load will cause the switch to burn, compressor failure. If you encounter the use of plug-in or to swap plug-in row, please switch the key press out of change in the cautious operation 9. Condenser cleaning once a month, 10. Keep the machine ventilated around the 2 end ventilation 11. The machine can not be reversed or tilted 45 degrees above