Air Conditioning Aluminum Fin Stock

  • Model NO.: 1100, 1200, 8011, 3003, 1030B
  • Corrosion Durability: Higher
  • Condition: New
  • Treatment: Mill Finished
  • Temper: Soft
  • Trademark: TRUMONY
  • Specification: ISO 9001: 2000, ISO/TS16949: 2002
  • HS Code: 76071900
  • Type: Roll
  • Application Fields: Mechanical Engineering
  • Thickness: 0.08-.02mm
  • Usage: Air Conditioner
  • Width: 50-1440mm
  • Transport Package: Wooden Pallet, Standard Export Seaworthy Packing
  • Origin: China

Type: Bare, hydrophilic ( white, blue, gold)
Alloy: 1100, 1200, 8011, 3003, 1030B
Temper: H22 H24 H26 O
Thickness(mm): 0.080-0.20
Width (mm): 50-1070
Core I. D.: Φ 75, Φ 150, Φ 200, Φ 300

No. Item index Technique index
1 Film thickness 1.0~2.0um (Single side average thickness)
2 Hydrophilicity Primary contact angle Primary contact angle≤ 10°
Continuous contact Continuous contact≤ 30°
3 Anderence strength Erichson test(press deeply to 5mm): No peeling
Gridding test(100/100): No plunger separation
4 Corrosion resistance Salt spray test(72 hours)
5 Alkali resistance Dipped in 30% NaOH in 30C for 3 minutes,
Absolutely no blister
6 Impregnant resistance Sample weight loss 1%
7 Heat resistance Under 300C, for 5 minutes, performance and
Colour unchanged
Under 300Cfor 5 minutes, the coating film
Becomes a little yellow
8 Oil proof DIP in volatile oil for 24 hour,
No blisters on the coating film
9 Odor of the coating film No order
10 Abrasion to mould Same as ordinary aluminium foi.
Air Conditioning Aluminum Fin Stock



 

Motorized Manual Decoiler is design for the low weight metal coils uncoiling, it`s located at the beginning of a process line used to hold and safely pay off or uncoil the steel strip, usually configured with the sheet Metal Straightener, Nc Servo Feeder machine and Power Press Machine.

Motorized Manual Decoiler can uncoiler the coil strip from 70mm to 800mm width, from 0.2mm to 6mm thickness and load the weight up to 2tons. Usually it`s suible for the inner diameter 450-530mm, and outer diameter 1200mm.

What`s more, if the thickness over the 3mm thickness, we suggest add the pressure arm to avoid injury the operator due to the excessive flexibility of materials.

 

Motorized Manual Decoiler

Uncoilers & Decoilers,Horizontal Uncoiler Machine,Standard Decoiler Machine,Motorised Decoiler Machine,Steel Coil Rack,Sheet Metal Decoiler

Mayflay Machinery(huizhou) Co.,LTD , https://www.pressfeeders.com

This entry was posted in on