Truck Parts Clutch Release 360111 Bearing

Model NO.: 360111
Structure: Deep Groove
Type: Ball
Precision: P4,P5,P6,P0
Noise: Z1,Z2,Z3
Sample: Avaliable
Seals Type: Zz,2RS,Open
Outside Diameter: 40 - 100 mm
Vibration: Z1V1, Z2V2, Z3V3, Z4V4
Trademark: GYB
Transport Package: Barreled Package/Outer Carton/Pallets
Specification: 55x90x18 mm
Origin: Baotou
HS Code: 8482102000
Truck Parts Clutch Release 360111 Bearing

Product Description
The hub bearing is primarily designed to provide load and precise guidance for the rotation of the hub. It is an extremely important component for both axial loads and radial loads. Traditional car wheel bearings consist of two sets of tapered roller bearings or ball bearings, with installation, oiling, sealing, and clearance adjustment performed on the production line. This structure makes it difficult to assemble in the automobile production plant, leading to high costs, poor reliability, and maintenance challenges. The wheel bearing unit is developed based on standard angular contact ball bearings and tapered roller bearings, combining two sets of bearings into one. It offers good assembly performance, eliminates the need for clearance adjustment, is lightweight, compact, has a large load capacity, and can be pre-lubricated, eliminating the need for external hub seals and regular maintenance. It is widely used in cars and gradually expanding its application in trucks.

Maintenance Attention
During maintenance, it is often found that some cars have excessive driving noise. Checking the tires shows no abnormal wear, and lifting the wheels does not reveal significant noise. This phenomenon is usually caused by abnormal damage to the hub bearing, which refers to damage due to improper installation. Front wheel bearings are generally double-row ball bearings. If installed using hammer percussion or pressure through the inner ring, it may cause damage to the raceway. When the vehicle is running, the noise may not be noticeable when the wheels are off the ground, but proper installation is crucial for the bearing's longevity.
Truck Parts Clutch Release 360111 Bearing
Truck Parts Clutch Release 360111 Bearing
Related Bearings


Bearing NO.
Boundary dimensions(mm)
Load rating(kN)
(kg)
d
mm  in.		 D
mm  in.		 B
mm  in.		 r smin
mm  in.		 Cr.0 Cor Mass
1601 4.763  .1875 17.463  .6875 6.350  .2500 0.3  .012 1.511 0.724 0.004
1602 6.350  .2500 17.463  .6875 6.250  .2500 0.3  .012 1.511 0.724 0.006
1603 7.938  .3125 22.225  .8750 7.144  .2812 0.3  .012 2.547 1.342 0.010
1604 9.525  .3750 22.225  .8750 7.144  .2812 0.38  .015 2.547 1.342 0.015
1605 7.938  .3125 23.019  .9062 7.938  .3125 0.3  .012 2.547 1.342 0.012
1606 9.525  .3750 23.019  .9062 7.938  .3125 0.38  .015 2.547 1.342 0.014
1607 11.113  .4375 23.019  .9062 7.938  .3125 0.38  .015 3.556 1.938 0.016
1614 9.525  .3750 28.575  1.1250 9.525 3750 0.64  .025 3.921 2.245 0.035
1615 11.113  .4375 28.575  1.1250 9.525 3750 0.64  .025 3.921 2.245 0.034
1616 12.700  .5000 28.575  1.1250 9.525 3750 0.64  .025 3.921 2.245 0.030
1620 11.113  .4375 34.925  1.3750 11.113  .4375 0.64  .025 5.881 3.471 0.050
1621 12.700  .5000 34.925  1.3750 Mechanical Seals For Pumps

Mechanical Seals are essential components in pumps, playing a crucial role in preventing leakage and ensuring the efficient operation of the pumping system.
Mechanical Seals For Pumps are designed to create a tight seal between the rotating shaft and the stationary housing of the pump. They consist of several parts, including a stationary seal face, a rotating seal face, springs, and other components. These seals work by creating a barrier that prevents the pumped fluid from escaping along the shaft.
Mechanical Seal For Water Pump is a specific type of mechanical seal designed for use in water pumps. Water pumps often handle a wide range of fluids, including clean water, wastewater, and chemicals. The mechanical seal for water pump is designed to withstand the specific conditions and requirements of these applications.
Mechanical Seals For Pump come in various designs and configurations to suit different types of pumps and operating conditions. Some common types include single spring seals, double spring seals, and cartridge seals. Each type has its own advantages and disadvantages, depending on factors such as pressure, temperature, and fluid compatibility.
Pump Seals are another term used to refer to mechanical seals for pumps. These seals are available in different materials, such as carbon, ceramic, and silicon carbide, to meet the specific needs of different applications. The choice of material depends on factors such as the type of fluid being pumped, the operating temperature, and the required durability.
In conclusion, mechanical seals for pumps are critical components that ensure the reliable and efficient operation of pumping systems. Whether it's a mechanical seal for a water pump or a general mechanical seal for a pump, these seals play a vital role in preventing leakage and maintaining the integrity of the pumping process. Pump seals come in various designs and materials to meet the diverse requirements of different applications.

Mechanical Seal For Water Pump,Mechanical Seals For Pump,Pump Seals,Mechanical Seal Pump

Zigong Yibaijie , https://www.oz-yibaijie.com

This entry was posted in on