Shanghai Ship Research Institute 3D hydraulic jacking machine lifts 1,700 tons of offshore drilling ship

Recently, the “Shipi” brand three-dimensional hydraulic jacking machine developed by Shanghai Ship Technology Research Institute has topped the “heaviest” section of the Shanghai Shipyard Ship Co., Ltd. Chongming Base since the development of the equipment. The positioning movement of the 1700-ton offshore drilling ship segment was achieved.
According to reports, since the brand's three-dimensional hydraulic jacking machine was introduced to the market in 2008, it has been serving the shipyard's flat bottom section of the ship, and has formed a series of products through five years of exploration and practice. At the same time, according to the actual use of the shipyard, the solution can be customized to meet the needs of different customers.
During the positioning movement of the 1700-ton offshore drilling ship, the connection mode of the engineering field bus communication was adopted, and 8 three-dimensional hydraulic jacking machines were centrally controlled. The realization of linkage control of 8 jacking machines proves that the positioning system can expand more and more equipment safely and conveniently, and can expand up to 99 units at the same time to control the linkage, which can adapt to the larger total segment closing requirements in the future.

Duplex Boiler Tube

DUPLEX STAINLESS STEEL

Duplex Stainless Steels Available

Yuhong Group supplies LDX2101, 2205, Ferralium 255, Zeron 100 and LDX2507 in the form of plate, sheet, strip, bar, pipe, tubing, pipe fittings, flanges and weld wire.


Duplex Stainless Steel Overview

Duplex Stainless Steels, also referred to as austenitic-ferritic stainless steels, are a family of grades with about equal proportions of ferrite and austenite. These steels have a duplex microstructure which contributes to their high strength and high resistance to stress corrosion cracking. Due to their high content of chromium, nitrogen and molybdenum, duplex steels offer good resistance to local and uniform corrosion. Duplex stainless steels have good weldability.


Today, modern duplex stainless steels can be divided into three groups:
Lean Duplex such as LDX2101
Standard Duplex such as 2205, the work-horse grade accounting for more than 80% of duplex usage
Super Duplex such as Ferralium 255 and Zeron 100 and LDX2507

Of the duplex grades, duplex 2205 is the most widely used. However, the super duplex steels like Zeron® 100 and LDX2507 are excellent for servicing severe corrosive environments, such as offshore and marine applications. Lean duplex 2101 is available as an economic alternative to 300 series stainless steels.


What are the Characteristics of Duplex Stainless Steels ?
Very good resistance to uniform corrosion
Very good resistance to pitting and crevice corrosion
High resistance to stress corrosion cracking and corrosion fatigue
High mechanical strength
Good sulfide stress corrosion resistance
Good abrasion and erosion resistance
Good fatigue resistance high energy absorption
Low thermal expansion
Good weldability


In what Applications are Duplex Stainless Steels® used ?
Oil and gas equipment
Offshore technology
Seawater desalination plants
Chemical industry, especially when handling chlorides
Flue-gas cleaning
Desalination plants and seawater systems
Pulp and paper industry
Cargo tanks and pipe systems in chemical tankers
Firewalls and blast walls on offshore platforms
Bridges
Storage tanks
Pressure vessels, reactor tanks, and heat exchangers
Rotors, impellers and shafts

Duplex Boiler Tube,Duplex Seamless Boiler Tube,Duplex Steel Boiler Tube

YUHONG GROUP CO.,LIMITED , https://www.alloypipeline.com

This entry was posted in on