Peanut Oil Pressing Method the process of producing Peanut Oil is as follows Peanut kernel → Cleaning → crushing → flaking → cooking → pressing Operating instructions:Peanut oil is higher oil content,oil content as high as 40-50%.Cleaning with specifications of 10 mesh / inch screen,so that impurities do not exceed 0.1%,then broken by the crusher,and broken up to 4-6 flap,by rolling embryo,and then into the steaming and frying section to make its moisture content of 1-2%,temperature up to 120-130 degrees before pressing. Note:If no crushing and rolling embryo equipment, can also cooking screening peanut use the flat-bottomed cooker (drum cooker can add water 4-6%, flat-bottomed cooker can add water 8-10%), cooking peanuts to light yellow, the temperature reached 110-150 degrees, they can start pressing. Peanut Oil Pretreatment Section-Pic of Vibration cleaning sieve Peanut Oil Pretreatment Section-Pic of Peanut Crushing Machine Peanut Oil Pretreatment Section- Pic of Rolling Embryo Equipment Peanut Oil Pressing Plant /Peanut Oil Mill Plant China Dingzhou Yongsheng grain and Oil Machinery Co. Ltd. was founded in 2003,predecessor is Baoding Light Industry Machinery Factory.Our company is specialized in producing Edible oil machinery and equipment/Cooking Oil Processing Machine/Vegetable Oil Producing Machine in Hebei Province.Existing professional and technical personnel more than 80 people,including Edible oil professional senior engineer 22 people,covers an area of 35000 square meters,immobilisation corporelle is $15 million.With all kinds of modern mechanical processing equipment 95 units,heat treatment carburizing process for computer fully automatic temperature control,can meet the national advanced standards,test means of physical testing mechanical performance is complete.