This message comes from Asher Heimermann:
Flight for Life, which celebrated its 35th anniversary in 2019, shut down its helicopter base in Fond du Lac, Wisconsin on Friday, January 18, 2019, after a decade of providing medical air transport services from the city. According to a Facebook post from Flight for Life, the organization is downsizing its helicopter fleet. While the McHenry, Illinois base will continue to operate, the Waukesha-Milwaukee base is expected to move to the West Bend, Wisconsin area.Additionally, Flight for Life launched a ground ambulance service last October with two ambulances and plans to add a third unit soon, as reported on their Facebook page. This shift suggests a strategic move toward expanding land-based emergency response capabilities while scaling back on certain aerial operations.
Asher Heimermann photo
Asher Heimermann photo
Asher Heimermann photo
Ethylene Cracking Furnace Anchor
Anchors are mostly used as fixtures for integral linings (castable, plastic and sprayable linings). Refractory brick linings also use anchors, but they are not used in many occasions. Metal anchors are usually used to support and fix thin or heat-insulating integral linings, such as chimney linings, wear-resistant linings of petrochemical catalytic cracking reactors (usually tortoise shell mesh anchors), integral jet metallurgy The lining of the spray gun, the overall lining of the immersion pipe of the DH and RH vacuum degassing devices, the lining of the rotary kiln discharge day, the feeding port, etc. Metal anchors are mostly used to fix linings with a long-term use temperature below 1200 °C, or short-term use temperature above 1200 °C that can be used intermittently. Ceramic anchors are usually used to fix thicker (greater than 200mm) integral linings and are characterized by:
(1) It can withstand higher operating temperatures, and is generally used in the lining of kilns that are used for a long time above 1200 °C;
(2) It can withstand the erosion and corrosion of corrosive atmosphere;
(3) It can be extended to the working surface to reduce the peeling of the overall lining;
(4) Compared with metal anchors, the contact area with the refractory lining is large, so it has a greater supporting capacity;
(5) The thermal expansion coefficient is equivalent to that of the overall refractory material, which can eliminate the cracking or peeling of the lining due to thermal expansion mismatch
Ethylene Cracking Furnace Anchor,Corbel Anchor,601 Inconel Refractory Anchor,310 Stainless Steel Refractory Anchor
Puyu kiln technology (jiangsu) CO.,LTD , https://www.anchorpy.com