MS-100 Halogen Moisture Analyzer Operation Procedure
1. Connect the power supply to the moisture meter.
2, open the cover, set the appropriate temperature 105 °C, time 10min, close the lid (factory settings have been set up)
3, open the back, heating power switch
4, press the ON button, there is a heating time setting, set to 0min (moisture meter automatically determine the loss of water rate of work, no change within 30s, that is, automatically stop the heating)
5, Close the lid, (press ON key), the sample begins to heat and lose water, the top of the display shows
9, in the heating process, the user press the MODE button, the display moisture parameters can be changed. (Each press, in order to display the moisture content, drying rate, moisture regain, wet weight rate)
6. Automatically stop heating when there is no change in weight within 30s
7. When the measurement is stopped, turn off the rear heating power switch.
Signal 40pcs flag
Material:Knitted polyester 110g
Size:75x90cm,75x250cm,120x150cm
MOQ:5sets
Code Flag,Feather Flag,Digital Printing Flag,International Code Flag
CHANGZHOU STORMFLAG CO., LTD , https://www.stormflagchina.com