| Model | 4V110-06 | 4V210-08 | 4V310-10 | 4V410-15 |
| Working Medium | 40 μm filtered air | |||
| Motion Pattern | Inner guide type | |||
| The Position | Two-Position / Three-Position Five-port | |||
| Effective Area | 5.5mm² (Cv=0.31) | 5mm² (Cv=0.28) | 12mm² (CV=0.67) | 9mm² (Cv=0.50) |
| Joint Pipe Bore | Inlet=outlet=exhaust=G1/8 | Inlet=outlet=exhaust=G1/4 | Inlet=outlet=exhaust=G1/4 | Inlet=outlet=exhaust=G1/2 |
| Lubricant | No | |||
| Working Pressure | 0.15–0.8MPa (21–114psi) | |||
| Max. Pressure | 1.2MPa (170psi) | |||
| Operating Temperature | -5°C to 60°C | |||
| Voltage Range | ±10% | |||
| Power Consumption | AC: 2.5VA | DC: 2.5W | |||
| Insulation Class | F Class | |||
| Waterproof Protection | IP65 (DIN40050) | |||
| Wiring Form | Direct outlet or terminal type | |||
| Highest Action Frequency | 5 cycles per second | |||
| Shortest Excitation | ≤0.05 seconds | |||
| Weight | 120g | 200g | 310g | 590g |
This type of product showcases the aluminum alloy cylinder barrels of the three international brands FESTO/SMC/AIRTAC, explains our production process and experience, and shares the details of our cylinder aluminum tube production.Pneumatic Cylinder Tube.
Product Category
Round cylinder, square cylinder, Mickey Mouse cylinder, SDA, CQ2, ADVU and other compact cylinder, double rod cylinder and compact guide cylinder, stainless steel honing hydraulic pipe, etc.
Characteristics of different types of cylinder pipes
Circular type
It is commonly used for SC series pull rod cylinders and aluminum micro pneumatic cylinders. It has a simple structure, low cost, and easy installation. The inventory is large, so we can deliver quickly for most types. The maximum inner diameter is 320mm.
Square type
Mainly used for DNC series and ISO series cylinders. Square cylindrical tubes are much stronger and have more precise dimensions than ordinary circular cylindrical tubes. The inner wall is polished smooth and wear-resistant after oxidation treatment. It can be matched with most ISO15552 and ISO6431 cylinder front and rear bases.
The installation thread can be directly machined on the square cylindrical tube without the need for another rod to fix it. In addition, there is a mounting slot for the magnetic spring switch on the cylindrical tube, which makes it easier to directly fix the magnetic spring switch on it without any bracket. The operation is very simple. The aperture range is 32mm to 125mm.
Mickey Mouse shaped cylindrical tube
The cross-section of the Mickey Mouse cylindrical tube is similar to that of the Mickey Mouse, and is therefore commonly referred to as the Mickey Mouse cylinder, used for assembling SI, SU, and ISO series cylinders. The characteristic of this cylinder is the use of four protruding ribs to replace the tie rod on the tie rod cylinder. In this way, it can greatly reduce the problem of uneven installation force and is easier to assemble than SC cylinders.
The cost of the Mickey Mouse cylinder is between the SC circular cylinder and the DNC square cylinder, and its strength is much stronger than the SC type. The range of aperture (inner diameter) is 32mm to 320mm. Please note that although the appearance of the Mickey Mouse cylinder pipes in the SI and SU series is the same, there are slight differences in the specific installation dimensions, which cannot be replaced arbitrarily to avoid assembly problems.
Compact cylinder pipes such as SDA and CQ2
Compact cylinders are special. Their front and rear covers or bases are fixed with elastic retaining rings, unlike other cylinders that are fixed with threads or rods. The aperture range is usually 32mm to 100mm.
Double rod cylinder and compact guide cylinder
The biggest advantage of a double rod cylinder is that it can ensure parallel movement of the cylinder piston without any rotation or oscillation. Common double rod cylinder barrels include TN, CXS, MGP series, etc.
Stainless steel cylinder tube
Stainless steel cylinder tubes are generally used for assembling MA and DSN series stainless steel micro pneumatic pressure joint cylinders, and can also be used for assembling all stainless steel series pull rod cylinders or hydraulic cylinders. Due to the much higher pressure of hydraulic cylinders, the wall thickness of hydraulic cylinder pipes is also much thicker than that of ordinary cylinders. Stainless steel cylinder pipes are available in three grades: 304, 316, and 316L. Unless otherwise specified, the default material is stainless steel SUS304.
Pneumatic Cylinder Tube,Pneumatic Cylinder Tubing,Pneumatic Cylinder Pipe,SMC Aluminium Pipes Tubes
Foshan Weiyingjia Technology Co., Ltd , https://www.wyspneumatic.com