Equipped with a 10 HP HR186FA air-cooled diesel engine, this pump ensures high flow and self-priming capability; water pump
♦ Available in 2-inch, 3-inch, and 4-inch models to suit your specific needs!
♦ Recoil and Electric start options ensure easy starting!   water pump
   Â
| WATER PUMP | Model | DP40 | |
| Suction, discharge port diameter[mm(in)] | 100(4') | ||
| Cont. head(m) | 31 | ||
| Self-priming time(s/4m)Â Â Â Â Â Â Â Â Â Â Â Â Â Â | 180 | ||
| Max suction head(m) | 8 | ||
| Cont. capacity(m³/hr) | 96 | ||
| ENGINE | Engine model | HR186F | |
| Speed(rpm) | 3600 | ||
| Fuel consumption(g/kw.h) | 285 | ||
| Type | Single-cylinder, vertical, 4-stroke air-cooled diesel engine | ||
Displacement(cc) |
 406 | ||
Bore*stroke(mm) |
 86*70 | ||
Starting system |
Recoil or Electric | ||
| Fuel tank capacity(L) | 5.5 | ||
| STANDARD FEATURES | Oil alert | yes | |
| Connector of infall, Connector of outfall | yes | ||
| Filter | yes | ||
| Seal ring | yes | ||
| Hoop | yes | ||
| DIMENSIONS | Dimension(L× W× H)(mm) | 645×475×605 | |
| Net weight(kg) | 69 | ||
| 20FT | 99 | ||
Â
Step 1: Preparation Before Working
- Place the machine above ground and inject diesel or oil.
- Add 0# (or higher) diesel.
- Open the black lid and inject 2-5 liters; running dry is prohibited.
Step 2: Adjust Switch
- Adjust the switch to the center (or below) and tighten (or adjust to the maximum).
Step 3: Discharge Air in Tube
- Air may be present in the tube due to first-time use; it needs to be discharged.
Step 4: Pressure Reducing Valve
- Press the pressure valve down by hand (must hold the pull plate).
- Gently pull the plate four times and wait for the oil to come out. Then tighten the connector again.
Step 5: Pull the Plate
- (Do not press the valve with fingers.) Gently pull the plate once (the valve will pop up automatically), then put the wire back.
- Re-press the valve and hold the machine bracket, holding the pull-line with both hands and pulling it.
Step 6: Close the Machine
- Adjust the switch to minimum to close the machine.
Â
♦ We are a professional manufacturer of air-cooled diesel engines (3-20HP), diesel water pumps (1.5-6 inch), and small construction machinery.
♦ Modern and beautiful factory in Chongqing, warmly welcome you from all over the world to visit us!
♦ ISO, CE, GS, ROHS certifications available for customers worldwide.
Factory:
sealing bag machine,EPE cut,cutter
Guangzhou Baiyin Co.,Ltd , https://www.printerfinisher.com