· GPS system and car video surveillance system will explode

Perhaps everyone is reluctant to recall the disasters that occurred in 2011, such as the "7·22" Beijing-Zhuhai Expressway accident, "11.16", the traffic accident in Zhengning County, Gansu, etc., which caused us a heavy traffic accident. s damage.

Especially after the "7·23" motor train accident, both the railway department and the traffic management department have increased their attention to the safety of traffic vehicles. Feng Zhenglin, deputy minister of the Ministry of Transport, was in the "National Traffic Safety Production Emergency Video Conference". The new requirements for the supervision of sleeper buses were first proposed. Among them, the sleeper buses must be forced to install on-board video surveillance equipment. The enterprise monitors the conditions inside the trains at any time, and at the same time implements measures for temporary parking breaks from 2 to 5 in the morning. In order to meet the new requirements of the government, many passenger transport companies have purchased and installed car video surveillance equipment, which has caused an “explosive” growth in the car video surveillance market.

It is understood that a complete vehicle monitoring system consists of two parts: GPS positioning system and vehicle video monitoring system. The GPS positioning system enables the monitoring center to monitor the speed and direction of the vehicle's driving speed at any time. To a certain extent, it can monitor the driving situation of the vehicle, but it can not reflect the internal condition of the vehicle. After installing the vehicle video monitoring system, it can make up for this deficiency, and it is convenient for the monitoring center to understand the internal and external conditions of the vehicle and better protect the vehicle. Security. The installation of GPS positioning system for passenger vehicles has promoted the development of vehicle video surveillance to a certain extent.

Since the introduction of the mandatory policies of relevant government departments, many provinces and cities such as Beijing, Shanghai, Shandong, Hebei, Guangdong, etc. have gradually improved according to the time specified in the Notice on Strengthening the Dynamic Supervision of Road Transportation Vehicles (hereinafter referred to as the “Notice”). The GPS positioning system of the passenger vehicle is installed. According to industry sources, in addition to the GPS positioning system installed in some provinces and municipalities, some passenger transport companies have not installed the specific implementation plan for the installation of the vehicle video surveillance system, and have already installed in some vehicles. The car video surveillance system. The market performance of various car video surveillance manufacturers and passenger transport companies is all outstanding, and the car video surveillance market is good news. As far as the application of the current vehicle video surveillance system is concerned, in addition to being gradually applied to passenger vehicles, its application range has gradually expanded to bus enforcement vehicles, taxi logistics vehicles.

The promulgation of the new policy of the "Notice", especially in the policy, puts forward the requirement that the road transport vehicles must be forced to install the on-board GPS positioning system, indicating the determination of the government to vigorously rectify traffic safety issues. For example, the Road Transportation Management Office of Hanzhong City, Shaanxi Province, stipulates that all tourist bus sleeper buses in the city must be equipped with on-board video surveillance. If vehicles are not installed as required, they will not continue to participate in the operation; Zhangjiakou City Transportation Management Office, Hebei Province In order to further standardize the safety management of long-distance sleeper buses, it is stipulated that the GPS positioning system of the city's sleeper buses will be upgraded to the vehicle video surveillance system at the end of September 2011. All vehicles that do not have GPS positioning system and vehicle monitoring will not be issued. Transport permit. For car video surveillance manufacturers, the bus long-distance passenger transport and other industries have always been the main market for car video surveillance applications.

The strong support of relevant government policies is undoubtedly the support for the volume growth of market products, and it also gives the car video surveillance manufacturers a reassurance. According to Chen Wenzhao, monitoring product manager of Suzhou Keda Technology Co., Ltd.: "With regard to the current economic situation in the country and the state's policy support for vehicle monitoring, there will be explosive growth in vehicle video surveillance in the next two years."

Bearing Pressure Thick Film Heater

On the basis of thick film heater, our company developed the stainless steel welding interface heating element in order to meet the customers` needs of variety applications, this type of heating element can withstand 0.8 MPa pressure, it is a best choice for coffee machine, instant water heater, industrial water heating equipment and other products.


bearing pressure thick film heater



It is assembled by Thick Film Heating Tube, protective housing, thread interface welding connector, over temperature protection system, NTC, temperature senor and sprial column.


spare parts of bearing pressure heater



Power Density is up to 60W/cm2.

Temperature ramp-up between 80℃~150℃/S.

Electric Heating Circuit printed on tube surface`s insulation layers, and covered by another insulation layer. Water and Electric is insulated totally.

Thermal transfer efficiency ≥98%.

Long work life( > 10000H )

Environment and Health friendly: Non-electromagnetic radiation and heavy metal ions

Simple Structure & Compact Profile brings more possibility for new products R&D.

It can successfully replace Traditional Electric Heating Tubes/Elements, change their structures and performance completely, which can reduce energy consumption, increase energy utilization and save space.

advantage of bearing pressure thick film heater


30Mm Stainless Steel Welding Heater ,Welding Treatment Heater,Stress Relief Heat Treatment,Pwht Procedure For Carbon Steel

XINXIANG JIEDA PRECISION ELECTRONICS CO.,LTD , https://www.tubularheater.de

This entry was posted in on