The serial lines are used for different sizes coils with different thickness to be slit into special strips as requirements.This products are for roll mill,HF tube mill,cold forming machines,puching & press machines,etc.Raw material is CR coils,silicon steel,SS steel,color steel,AI,PPGI...Composed of coil car-un-coiler,guiding & pinch device,slitter,side guiding device,looping,tensioner,scrap,recoiler,recoil car,etc.
Technical Specification:
Â
| Type | Thickness | Width Range | Coil Weight | Min Strip | Strips No | Linear Speed | Blade Shaft |
| 3x1600 | 0.3-3mm | 1600&1800mm | 25T | ≥20mm | 5-30 | 0-150m/min | φ240 |
| 4x1600 | 0.5-4mm | 1600&1800mm | 30T | ≥30mm | 3-30 | 0-80m/min | φ240 |
| 6x1600 | 1-6mm | 1600&1800mm | 30T | ≥40mm | 5-20 | 0-60m/min | φ260 |
| 8x2000 | 2-8mm | 1600&2000mm | 35T | ≥70mm | 5-20 | 0-50m/min | φ300 |
| 10x2200 | 3-10mm | 2000&2200mm | 35T | ≥80mm | 5-18 | 0-40m/min | φ320 |
| 12x2200 | 3-12mm | 2000&2200mm | 35T | ≥100mm | 5-20 | 0-30m/min | φ320 |
| 16x2500 | 4-16mm | 2000&2500mm | 35T | ≥100mm | ≤5 | 20m/min | φ400 |
| 20x2500 | 6-20mm | 2000&2500mm | 35T | ≥100mm | ≤4 | 20m/min | φ480 |
The thickness can range from the thinnest alloyed steel, down to 0,10 mm, to the thickest carbon steel, up to 16 mm,Strip Width, from the narrowest 100 mm to the widest 2500 mm
Coils Weight, up to 45 tons,Line Speed, up to 200 m/min.
Â
The main function of the edge banding is to seal the cross-section of the board, so as to avoid the damage of the board and the adverse factors (mainly moisture) in the process of use and prevent the formaldehyde inside the board from volatilizing, and at the same time achieve the effect of beautiful decoration.
The product has the following main features: smooth surface, no blistering, no ribbing, moderate gloss, smooth surface and back surface, uniform thickness, uniform width, reasonable hardness, high elasticity, good quality, strong wear resistance, trimmed and sealed The color of the side and the side is close to the surface color, not whitish, good gloss, and the overall color of the finished furniture is coordinated.
The role of edge banding:
First, the edge banding has the function of blocking harmful gases such as formaldehyde
Good edge banding or multi-sided edge banding can reduce the amount of formaldehyde emission per unit time (ie, slow down the emission rate). It is worth noting that edge banding will not reduce the formaldehyde content of the board, but this has the advantage of edge banding. It can reduce the formaldehyde emission per unit time of unenvironmentally-friendly sheets to a level that is acceptable to humans and does not affect health.
Second, the role of beautifying furniture
Good edge banding has the effect of beautifying office furniture, but if it is to be beautiful, the requirements for edge banding will be higher. Not only must the edge banding and the end surface of the board be firmly and smoothly combined, but also that the edge banding must be combined with other The joints of the surfaces should not have defects such as bottoming, chipping, and large gaps, and the transition should be natural, smooth and smooth.
Third, extend the service life of office furniture
The precise edge sealing design of the board can prevent water or other liquids from entering the board, avoiding the expansion, deformation and breeding of bacteria on the desktop, thereby prolonging the service life of the office furniture, and the office furniture after the edge sealing treatment is also more expensive in terms of cleaning easy.
Fourth, avoid sharp edges and corners from hurting people's bodies
The general edge banding will use the dull edge banding design to smooth the corners of the table, thereby reducing the damage to the body by the sharp corners
PVC Edge Banding For Office,Pvc Edge Banding For Office,Pvc Edge Banding For Office Table,Pvc Edge Banding For Office Furniture
Henan Shunbang Chemical Industry CO.,Ltd , https://www.spvcresin.com